Author | Topic |
Location: Sydney
Registered: February 2003
|
HKS pod, Microtech ecu, p/s pump...
|
Fri, 10 September 2004 06:17
|
|
HKS Pod Filter, brand new filter (never driven with), cage is a bit rusty.
$35
http://members.optusnet.com.au/christopha/pod.jpg
http://members.optusnet.com.au/christopha/pod2.jpg
Silicon Reducer 80mm-63mm, fits hks pod (also have a wonderful high performance metal pipe to fit the other side)
$25
http://members.optusnet.com.au/christopha/reducer. jpg
Microtech D4s Fuel Computer, with loom for 5mge, diagrams
$100SOLD
http://members.optusnet.com.au/christopha/ecu.jpg
One Falken Ziex 235/45/17
pretty worn on edge, good for spare/burnout, (its just dirty in the pics)
$5
http://members.optusnet.com.au/christopha/tyre1.jp g
http://members.optusnet.com.au/christopha/tyre2.jp g
http://members.optusnet.com.au/christopha/tyre3.jp g
Also, if there are any desperate MA61 owners looking for special parts, i may have what you are looking for.
Cheers,
Chris
[Updated on: Fri, 17 September 2004 08:39]
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Fri, 10 September 2004 08:57
|
|
bump
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Fri, 10 September 2004 11:11
|
|
bump
|
|
|
Registered: August 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Fri, 10 September 2004 22:56
|
|
drivers door locking actuator
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sat, 11 September 2004 03:30
|
|
you'll need to speak to mike about that, he got the doors.
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sat, 11 September 2004 14:23
|
|
bump
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sat, 11 September 2004 14:31
|
|
external trim along the bottom of the back passenger windows - goes from b pillar to the funky triangular metal cover at the back corner of the window. need both sides.
also after driver side indicator lens (front)
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 01:37
|
|
no can do on the trim, but i do have indicator lenses.
|
|
|
Location: Sunshine Coast Queensland
Registered: October 2003
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 10:25
|
|
it is not "mapped", it is an analogue computer.
it has an internal map sensor.
as for the ma61 parts i have lots of interior, a few exterior parts and some more.
its easier just to tell me what you want and i can tell you if i have it.
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 10:28
|
|
any black interior parts?
seats, intact aircon vents (the little ones at the side that dont move, that always break)
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 10:33
|
|
haha i have a million and one parts and nothing anybody needs.
all my interior parts are blue.
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 10:48
|
|
I only want a few parts, and it take forever to find the bloody things!
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 10:49
|
|
ps - if your blue crappy vents mentioned above are in good condition, I'll buy & dye them
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 10:50
|
|
once again...
the dash went to the tip with the bare shell
|
|
|
Location: Sunshine Coast Queensland
Registered: October 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 12:07
|
|
STR8 2.8 wrote on Sun, 12 September 2004 20:25 | it is not "mapped", it is an analogue computer.
it has an internal map sensor.
|
Then consider it sold!
PM me your bank details and we'll go from there.
Postcode here is QLD 4560.......so you can add postage to the cost.
|
|
|
Location: Sunshine Coast Queensland
Registered: October 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Sun, 12 September 2004 12:13
|
|
STR8 2.8 wrote on Sun, 12 September 2004 20:25 | as for the ma61 parts i have lots of interior, a few exterior parts and some more.
its easier just to tell me what you want and i can tell you if i have it.
|
Do you have those little plastic/rubber strips that go between the headlight and the nosecone when the lights are down?
What about a good condition lower half of the front bar?
The little brace that sits in the middle of the rear sunshade?
|
|
|
Location: adelaide
Registered: June 2004
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 01:18
|
|
I'll take the HKS pod, if you will post it to adelaide..
pm me
|
|
|
Location: Adelaide
Registered: September 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 02:33
|
|
Hiya,
If Ed hasn't snaffled them, I have a mate interested in the front D/side blinker. What $ ?
Also after the front cowl panel that sits under the w/shield wipers. Available ?
Radio/ashtray surround. Available ?
Under dash plastic panel (drivers side that goes under the column). Available ?
Can't think of anything else particular at the moment.
Cheers
Michael B
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 04:00
|
|
Darryl:
no light strips, no sunhade brace, not sure what you mean about "lower half of front bar"
Deltathing: it looks like the pod is already sold but ill get back to you
Bbaacchhyy: ill have a look for the blinker, no cowl panel, i have a radio surround but i think it has some small holes in it, i have the under dash panel in blue.
|
|
|
Location: Adelaide
Registered: September 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 04:06
|
|
STR8 2.8 wrote on Mon, 13 September 2004 14:00 | Bbaacchhyy: ill have a look for the blinker, no cowl panel, i have a radio surround but i think it has some small holes in it, i have the under dash panel in blue.
|
Cheers.
Can you get pics of the radio surround ?
What is the underdash like ? Cracks ?
Any idea on prices - needs to be shipped to Adelaide.
Cheers
Michael b
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 05:01
|
|
found the blinker housings but unfortunately discovered they both have cracks in them.
remembered the radio surround is not mine, it belongs to JAZE, so perhaps you should pm him and ask.
pic of under dash panel: http://members.optusnet.com.au/christopha/dashpane l.jpg
you can see the tab in the bottom left of the picture is broken otherwise the rest of it is in good nick.
as for postage, give me a postcode and ill have a look
|
|
|
Location: Adelaide
Registered: September 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 05:07
|
|
How bad are the cracks ?
I'll PM Jaze and ask him re the radio surround.
The postcode is 5034
Oooroo
|
|
|
Location: Sydney
Registered: February 2003
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 09:56
|
|
BlackSupra wrote on Sat, 11 September 2004 08:56 | drivers door locking actuator
|
If you are interested in one that both opens and locks (as you prbly know the stock one will only lock, not unlock, pretty annoying if you have remote central locking), you could grab the actuator out of the rear left passenger door of a MX62 cressida (no idea but others might be same / similar). You will need to grind off the mounting tab bit that is held on with the two squashed stud things, and swap it with the stock MA61 one (yeah they are different). You'll also need to run and extra wire from the central locking relay if you want it to open as well tho!
Other wise if you can't find a MA61 actuator and really want one, I have one (without the tab) that works *not trying to steal someones sale tho*
Cheers
Wilbo
|
|
|
Registered: August 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 09:58
|
|
shit, id heard the didnt open, but thought that was just crap
well yeah im after open and close
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Mon, 13 September 2004 12:29
|
|
BlackSupra wrote on Mon, 13 September 2004 19:58 | shit, id heard the didnt open, but thought that was just crap
well yeah im after open and close
|
yeah its teh gay. I made a spare MX62 one I had work the other day, so there is that option if you get keen (btw it wasn't rocket science! lol)
Cheers
Wilbo
|
|
|
Location: Sydney
Registered: February 2003
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Wed, 15 September 2004 02:00
|
|
tell us the price, son!
also - any chance of a black boot carpet?
cheers
ed
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Wed, 15 September 2004 09:55
|
|
dunno $10 maybe?
as for boot carpet..nay
i would like some myself actually (in blue)
|
|
|
Location: Sydney
Registered: February 2003
|
Re: HKS pod, Microtech ecu, p/s pump...
|
Thu, 16 September 2004 02:34
|
|
righto, guess ill keep it then
|
|
|