| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2004
|
|
1ggte sump removal
|
Mon, 13 September 2004 02:04
|
 |
Just managed to get the engine and g/box out of the halfcut (by myself) and put the engine on a stand, I have undone all the nuts and bolts to get the sump off but it wont budge, any tricks to it?
Help appreciated
Cheers
Dust
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 02:12
|
|
if it is like my 1jz it had some silicone type stuff sticking it together. We just pried it apart with a screwdriver and eventually it will come off.
good luck
|
|
|
Location:
Brisbane
Registered:
February 2004
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 02:26
|
|
hehe thanks, that was my next approach, just thought I would check to make sure there wasnt some sort of trick to it 
|
|
|
Location:
Hobart, Tas
Registered:
May 2002
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 03:37
|
|
|
Out of interest, what halfcut is it, and what are you putting the IGGTE into?
|
|
|
Location:
Brisbane
Registered:
February 2004
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 04:25
|
|
its a 1990 chaser half cut, putting into 2wd hilux.
Need the sump off so I can get custom one made up.
|
|
|
Location:
Hobart, Tas
Registered:
May 2002
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 04:51
|
|
| Dust wrote on Mon, 13 September 2004 14:25 |
its a 1990 chaser half cut, putting into 2wd hilux.
Need the sump off so I can get custom one made up.
|
Surely you can swap sumps with someone else? Or do neither the front, mid, and mid/rear suit a hilux crossmember? If one of them goes, then you can just swap sumps & pickups with someone.
What engine did the hilux have - 22R? If so, what are you doing about mounts?
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 05:07
|
|
yeah, cos if its a 22r-e hulix a front sump should solve it.
though you may need a custom sway bar.
|
|
|
Location:
south east - melbourne
Registered:
March 2004
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 06:12
|
|
out of curiousity , does anyoe know what box is in the 1g-gte automatic tranny the name of the box preferably and model number , need to find some parts for it for tranny service
cheers
|
|
|
Location:
Brisbane
Registered:
February 2004
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 07:53
|
|
its an 83 hilux, 18r engine.
not sure on engine mounts yet, but I am documenting my conversion with pics, will post it when I am done.
|
|
|
Location:
Ipswich
Registered:
October 2003
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 08:09
|
|
|
The auto is an a340e i'm pretty sure.
|
|
|
Location:
south east - melbourne
Registered:
March 2004
|
|
Re: 1ggte sump removal
|
Mon, 13 September 2004 22:45
|
|
thanks someone else siad the same so hopefully it is
cheers
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1ggte sump removal
|
Tue, 14 September 2004 07:09
|
|
|
Back to the original question if you havnt got the sump of yet try heating up whats sealing it, would make it a lot easeir to get off.
|
|
|
Location:
newcastle nsw
Registered:
May 2002
|
|
Re: 1ggte sump removal
|
Tue, 14 September 2004 23:15
|
|
dust, for engine mounts on your conversion, get two (cant remember if its drivers or passenger side) engine mounts off the 18r elongate the holes slightly and it will bolt in.
you will also have too shorten the intake pipes to the plenum by 100mm, gearbox crossmember also needs too be modified 
just a few handy hints, any other questions just pm me, relatively straight forword conversion though
|
|
|
