Author | Topic |
Location: townsville NQLD
Registered: February 2004
|
where does this bolt go?.....18r-g
|
Tue, 21 September 2004 10:47
|
|
have been puttin my 18r-g back together and cant figure out wherethis bolt goes. it has 14mm head, 10mm diametre, bout 10mm of thread and a copper washer.
thanx
brett
|
|
|
Location: Gold Coast
Registered: October 2002
|
Re: where does this bolt go?.....18r-g
|
Tue, 21 September 2004 10:56
|
|
your kidding right? not even a picture!
|
|
|
Location: townsville NQLD
Registered: February 2004
|
Re: where does this bolt go?.....18r-g
|
Tue, 21 September 2004 11:02
|
|
sorry nope. it seems to be from somewhere important seeing as it has a copper washer. maybe a oil bung for somewhere. im worried there is gunna be conseguences if i dont find a home 4 it
thanx anway
brett
|
|
|
Location: Gold Coast
Registered: October 2002
|
Re: where does this bolt go?.....18r-g
|
Tue, 21 September 2004 11:51
|
|
the only thing i could think of is gearbox drain or filler? cant remember if they are 14s though
not to plug a water fitting on the thermostat housing?
|
|
|
Toymods Social Secretary
Location: Sydney
Registered: July 2002
|
Re: where does this bolt go?.....18r-g
|
Tue, 21 September 2004 12:39
|
|
sump drain plug?
gearbox drain/fill?
fuel lines for carbies?
|
|
|
Location: townsville NQLD
Registered: February 2004
|
Re: where does this bolt go?.....18r-g
|
Tue, 21 September 2004 23:22
|
|
thanx......yeah it is from the motor becoz im puttin it back together and every bolt i took off i put in a glad clip top bag.
anyway, ill have another look again when i finish puttin it back together ...(waitin on head gasket, valve stem seals, cam cover gasket)
brett
|
|
|
Location: Canberra
Registered: December 2002
|
Re: where does this bolt go?.....18r-g
|
Wed, 22 September 2004 02:14
|
|
Might be the one that goes on the block just above the idler sprocket. It blocks off the hole that is usually taken up by the upper chain squirter nozzel on the 18r-c.
|
|
|
Location: Rocklea qld
Registered: February 2003
|
Re: where does this bolt go?.....18r-g
|
Wed, 22 September 2004 09:39
|
|
im with jason. Goes just above the oil pump drive shaft. Blocks a hole that goes up to the top of the block. also is used to hold the backing plate of the timing case to the block. I also had this prob with mine but sorted it easily enough.
|
|
|