Author | Topic |
Location: Ipswich QLD
Registered: May 2002
|
18RGEU intake pipe???
|
Fri, 04 October 2002 05:54
|
|
I'm after the pipe/tube that connects the air-box to the throttle body. Does anyone have a spare? What else could i use?
Thanks
Ben
PS- only be on there temporarily, until i put the turbo on, then i'll have custom intake piping from the intercooler
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: 18RGEU intake pipe???
|
Fri, 04 October 2002 05:59
|
|
I've never seen a factory inlet pipe for an 18R-GEU, and even if you had one it probably wouldn't fit in your engine bay (remember 18R-GEU's were never fitted to RA28's). I'm using a short length of 70mm flex tube which I bought at a truck parts supplier, in conjunction with a couple of big hose clamps.
|
|
|
Location: Ipswich QLD
Registered: May 2002
|
|
|
Registered: May 2002
|
Re: 18RGEU intake pipe???
|
Fri, 04 October 2002 09:07
|
|
that pipe looks just like what i have, you can get them from any performance place that deals with intercoolers, u may need some extra rubber around the manifold if the diameter is too big. It cost me something like $25 for 20cm length, well worth it to stop air leak after the AFM.
rob
|
|
|
Location: Hornsby, N.S.W
Registered: September 2002
|
Re: 18RGEU intake pipe???
|
Wed, 09 October 2002 03:04
|
|
i just used a peice of pipe bendy pipe of a vp commodore air box in conjunction with my unifilter and afm, its got a good bend so that the filter sits right over near the ignition coil.
just giving you some ideas.
JUZZO
|
|
|