| Author | Topic |
|---|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
1g-gte part numbers
|
Thu, 30 September 2004 05:26
|
 |
I know everyone is going to say "Do a search" but I've done a toymods forum search on every possible phrase I could imagine that might come up with the thread that I"m after.
There was a thread a while back that had the part numbers for the toyota timing belts and the rear main seal and shit like that. I can't for the life of me find it now. Anyone know where it is again?
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1g-gte part numbers
|
Thu, 30 September 2004 05:43
|
|
Timing belt is 13568-79035
Cant remember which one out of my lot the RM was, but I'd be removing the old one and getting it matched, a LOT cheaper 
|
|
|
Registered:
June 2004
|
|
Re: 1g-gte part numbers
|
Fri, 01 October 2004 04:42
|
|
I have h few part numbers for my 1GGTE if they help
T865 gates timing belt
TC12660VI rmos in viton
Z418 oil filter
54TB058B05 for the tensioner
if you need any thing else let me no and ill see waht i have.
|
|
|
Location:
Brisbane
Registered:
February 2004
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1g-gte part numbers
|
Fri, 01 October 2004 23:17
|
|
|
Seriously, I cannot stress this enough. Get the oil seals out, then take them and get the part numbers matched. They aren't made by Toyota anyway. You will seriously save over 5 times the cost of getting the exact same seals from Toyota.
|
|
|
Registered:
June 2004
|
|
Re: 1g-gte part numbers
|
Sat, 02 October 2004 01:26
|
|
these are the part numbers i have got for my 1g. dont no if they are the same all the way through or not. cam seals are m1173, front main is the timing cover oil seal but i cant remember the part number  oil pump seal is ag0994e or a tc12435. if you can find out the thread on the flywheel bolts and go to a engine reconditioning shop, they should be able to help you.
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: 1g-gte part numbers
|
Thu, 07 October 2004 22:23
|
|
|
all i can say is the rear main oil seal is a rip...$73!! from toyota
|
|
|
Location:
Hobart, Tas
Registered:
May 2002
|
|
Re: 1g-gte part numbers
|
Thu, 07 October 2004 23:46
|
|
| EvilJack wrote on Fri, 08 October 2004 08:23 |
all i can say is the rear main oil seal is a rip...$73!! from toyota
|
Umm... last time I bought a rear main (for a 22RE) it was $5-7 IIRC..  That's nasty!
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 00:36
|
|
|
Hehe, from Toyota every one of those seals is nasty, particularly when they are all made by NOK, and buying them directly is only a few $ each
|
|
|
Registered:
June 2004
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 02:30
|
|
|
I dont no where you are in sydney but give CBC a ring 9648 4755 and give them the seal numbers i gave you. that number is for silverwater, but they will be able to help you. i think the raer main number is tc12660, get a viton seal they are a higher temp seal.
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:04
|
|
|
the cam seals arent too bad, they are like $18 ea. from toyota
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:04
|
|
Or they are $3 each from a place that sells the NOK seals as well 
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:09
|
|
any idea what the part number on an entire VRS kit is and where I could get one from??
How much etc?
any help muchos gracsios muchchos 
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:14
|
|
JCMF, stop it 
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:17
|
|
Seriously dude. I called up Toyota, got all the part numbers. Gave them to my mechanic who ordered them all trade price for me, the cam ones were as you said $18 each. Got them back, wrong ones.
Took the old seal to gf's uncle. He replaced them for $2.60, $1.30 each. I cried.
|
|
|
Location:
Brisbane
Registered:
February 2004
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:22
|
|
Well, yeah I totally agree with JCMF about the seals
I ordered my timing belt $45 and Flywheel bolts $2 each.
|
|
|
Location:
Ebbw Vale, Qld
Registered:
January 2004
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:47
|
|
How good would it be if everyone put all the part numbers for stuff together in the Tech Docs section??
Then lazy bums like me wouldn't have to find them myself
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:48
|
|
|
jerks...all of yas
|
|
|
I supported Toymods
Location:
Adelaide
Registered:
July 2004
|
|
Re: 1g-gte part numbers
|
Fri, 08 October 2004 04:54
|
|
| Dust wrote on Fri, 08 October 2004 13:52 |
Well, yeah I totally agree with JCMF about the seals
I ordered my timing belt $45 and Flywheel bolts $2 each.
|
ahha $38 for a TB 
good old trade price with staff discount
|
|
|
Location:
Brisbane
Registered:
February 2004
|
|
Re: 1g-gte part numbers
|
Wed, 27 October 2004 07:45
|
|
OK finally got the time to do more on the 1g-gte thats takin up space in my garage.
Anyone know the part number for the water pump seal? just been googling for about 30 mins and found alot of useless info, it fell into about 10 pieces when i pulled the water pump off :/
|
|
|
Location:
Adelaide, SA
Registered:
May 2002
|
|
Re: 1g-gte part numbers
|
Wed, 27 October 2004 08:23
|
|
You mean the waterpump gasket?
Just make your own out of that gasket paper stuff... make sure it'll work for water stuff though 
|
|
|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Re: 1g-gte part numbers
|
Thu, 28 October 2004 01:11
|
|
No no..
Be careful with the water pump gasket, it's a real prick.
I'd recommend using the old one and layering it with loctite so the fucker doesn't leak.
because it can leak real easy.
|
|
|
