| Author | Topic |
|---|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
|
Location:
Land of Oz
Registered:
June 2004
|
|
Re: the T-18 is going to frank, finally!
|
Tue, 19 October 2004 10:49
 
|
 |
Yay!!! 
|
|
|
Location:
Castle Hill NSW
Registered:
March 2003
|
|
Re: the T-18 is going to frank, finally!
|
Tue, 19 October 2004 12:38
|
|
|
sensational!
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
|
Location:
Land of Oz
Registered:
June 2004
|
|
Re: the T-18 is going to frank, finally!
|
Fri, 22 October 2004 09:37
|
|
Hi,
Good stuff! Now I eagerly await a flurry of posts from you regarding things that you broke while dropping the clutch, or handbraking, or drifting, or...
seeyuzz
river
|
|
|
Location:
Inside a giant turbo (syd...
Registered:
June 2002
|
|
Re: the T-18 is going to frank, finally!
|
Fri, 22 October 2004 10:21
|
|
|
who did you take it too?
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
|
I supported Toymods
Location:
Sydney, NSW
Registered:
February 2004
|
|
Re: the T-18 is back from dyno tune
|
Sat, 23 October 2004 18:46
|
|
well done jeese,
good to here that price was good.. cant w8 to see LSD plans into actions..
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: the T-18 is back from dyno tune
|
Sun, 24 October 2004 00:16
|
|
Good to hear ! Those Kw figures sound quite impressive.
Do you know what they actually had to go to get it running better? Like was it the jet sizes or cam timing?
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: the T-18 is back from dyno tune
|
Sun, 24 October 2004 04:22
|
|
apparently the dizzy was way out, he re calibrated that and disconnected the vacumn advance and said it made a huge difference!
im not sure what else he played with, he fixed a broken float pin in one of the carbs so i think he must have rebuilt them or changed jets to have found that, and it was rich before and im sure he didnt give it back to me running rich so he must have re jetted it, and ide suspect he played with the cams, i asked him to check them out,
its amazing how much more go it has down low, i used to have to ride the clutch heaps on take off cause the engine didnt wanna pull the car along under 3000 rpm, i'll try and get the graph scanned and uploaded to this post, unfortunately it doesnt have a torque reading on the graph, just power.
|
|
|
