| Author | Topic |
|---|
Location:
Hackham South Australia
Registered:
July 2004
|
|
DIY's NEW PROJCT CAR for 2006\2007
|
Sat, 13 November 2004 22:47
|
 |
Hi all I am saving for my new project that is to start in '06\'07, I was wanting some feed back on the idea.
To be set up as a RWD
Shell: Late 70's early 80's Suzuki 550 Hatch.
Engine: 1UZFE
ECU: After market with 5 spd or Factory ECU is using auto
Drive Line: Supra 5 spd or auto with 1UZFE
Differential: Ford 9"??
Custom chassis: including removal of all unneccesary items like heater and lower dash. Relocation of Fire wall, and add a trans tunnel
Brakes: front struts replaced with cut down supra ones, using supra disks, rear will use what ever comes on the diff.
Any more ideas? I am open.
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: DIY's NEW PROJCT CAR for 2006\2007
|
Sat, 13 November 2004 23:20
|
|
Change that diff to a Hilux diff, just as strong, not as massive 
|
|
|
Location:
Adelaide
Registered:
January 2004
|
|
Re: DIY's NEW PROJCT CAR for 2006\2007
|
Sun, 14 November 2004 00:05
|
|
|
what would u use it for?
|
|
|
Location:
Brisbane
Registered:
October 2002
|
|
Re: DIY's NEW PROJCT CAR for 2006\2007
|
Sun, 14 November 2004 03:51
|
|
|
did u ever see scott sach's suzuki 800 hatch, was powered by a 4G54 turbo'd, way too much power for such a small wheelbase
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: DIY's NEW PROJCT CAR for 2006\2007
|
Sun, 14 November 2004 09:07
|
|
S-T-R-E-T-C-H it funny car style...
a 1UZ twin turbo suzuki limo would look awesome
also with that weight car, a big diff is not as essential...
run it into the 8's 
|
|
|
Location:
sydney
Registered:
May 2002
|
|
Re: DIY's NEW PROJCT CAR for 2006\2007
|
Sun, 14 November 2004 12:30
|
|
|
will a 1uz fit in the engine bay. there not very wide things. i know cause i got one.
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: DIY's NEW PROJCT CAR for 2006\2007
|
Sun, 14 November 2004 12:59
|
|
i was thinking of doing a 4agte/3sgte into a suzuki alto MR style cos the engine bay is like the size of a small box 
those shits r like 600kgs 
|
|
|
Location:
Hackham South Australia
Registered:
July 2004
|
|
Re: DIY's NEW PROJCT CAR for 2006\2007
|
Mon, 15 November 2004 10:05
|
|
Update..
Diff: Hilux for unbrakability, or a T18 diff.
Thank you to all
Arch the car will be street use, no it is not going to be engineered nor is it going through Regency Park to make it legal.
The statement that i will tell the cops is that "I thought it was fast for a 600cc motor"
Scrote, I have to say that the only bit of suzuki that will be original is the outer panels and skin. I am to build a completely custom chassis and the shell will be welded to it. Most of the unwanted and unneeded metal will be cut out. PM sent to you soon.
|
|
|
