| Author | Topic |
|---|
Location:
_Sydney _
Registered:
May 2002
|
|
Strut Brace for Soarer's
|
Fri, 25 October 2002 08:22
|
 |
Ive been looking around to getting a strut brace and my only main source i could find was getting something in from japan. Also not to keen on paying $300+ for one either. I contacted whiteline and Im having one made up. I went today and got some measurements made up and all that. The guy said hed let me know if they will go ahead and produce it for soares. Next step is for a prototype to be made up and fitted after that is all good, its sent back and a batch is made up, something like 4 to 6 weeks. So all should be well with this, if any one is interested ill let yas know how it goes. Final price should be around $200.  Yeah so if you cant find a strut brace contact whiteline and have a chat and see what you can get outa them. 
|
|
|
Location:
Wollongong
Registered:
May 2002
|
|
Re: Strut Brace for Soarer's
|
Fri, 25 October 2002 08:36
|
|
Good work mate
I want to replace the front sway bar first, cos it's too damn soft. Hard cornering makes the problem quite evident, even though the car is lowered like 4 inches.
The bar is hollow (stupid) so I want to get a solid bar the same diameter (easier to fit... no new parts).
|
|
|
Location:
_Sydney _
Registered:
May 2002
|
|
Re: Strut Brace for Soarer's
|
Fri, 25 October 2002 09:05
|
|
Yeah sway bars will be next coz they specialise in that aswell 
|
|
|
Location:
Preston
Registered:
June 2002
|
|
Re: Strut Brace for Soarer's
|
Sat, 26 October 2002 08:29
|
|
|
Cusco make a strut brace for Soarers, but it would be probs close to the $300 mark
|
|
|
Location:
Melbourne Eastern Suburbs
Registered:
October 2002
|
|
Re: Strut Brace for Soarer's
|
Sat, 26 October 2002 12:38
|
|
|
Kmac will make anything for anything.
|
|
|
I supported Toymods
Location:
yandina sunshine coast
Registered:
September 2002
|
|
Re: Strut Brace for Soarer's
|
Sat, 26 October 2002 12:47
|
|
suttos engineering quoted me 300 dollars to make one
all pretty close hey .. just shows there is some honest blokes around , they were to interested in how quick it was !!!
|
|
|
Location:
Sydney
Registered:
June 2002
|
|
Re: Strut Brace for Soarer's
|
Sun, 27 October 2002 12:12
|
|
Hey everyone,
I've got myself a Soarer TT, just wondering what places can make up a set of custom springs to suit the TEMS struts? I've been told to put on a set of K-Mac springs but I've never seen these on a Soarer before. Anyone have a locally custom-made set up? Also, what brake pads would you guys recommend?
Thanks
Jose
|
|
|
Location:
_Sydney _
Registered:
May 2002
|
|
Re: Strut Brace for Soarer's
|
Mon, 28 October 2002 08:34
|
|
I dont know to much abt the TEMS, I know I had them in originaly but
some one replaced them before I bought the car to coil overs. As for brake pads you can get the TRD ones or get some bendix metal kings.
|
|
|
Formerly TRD_RoLLa
Registered:
May 2002
|
|
Re: Strut Brace for Soarer's
|
Mon, 28 October 2002 13:42
|
|
Race brakes in Wetherill Park
for rotors and pads.
|
|
|
