| Author | Topic |
|---|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
|
I supported Toymods
Location:
Perth, WA
Registered:
May 2003
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 02 December 2004 10:06
 
|
 |
have to remove instrument cluster
so all the trims that surround it
then unscrew it from the gbox and pull it through
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 02 December 2004 13:06
|
|
yea the sprinter one was to short so i gotta use the ae71 cable 
so i might as well remove the whole bleeding dash for the sprinter as well to fit it in again 
|
|
|
I supported Toymods
Location:
Perth, WA
Registered:
May 2003
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 02 December 2004 13:08
|
|
sprinter one should fit
not the whole dash
but the instrument cluster
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 02 December 2004 13:09
|
|
koool
cheers
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
|
Location:
Perth
Registered:
September 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Tue, 07 December 2004 07:10
|
|
take of the plastic trim where the stock factory radio sits in, once this is off.. there should just be some empty vent holes and the cluster sitting in there, its held on by 4 screws..
if you cant get the surround off, just keep checking for screws, there allways one bastard one left! haha
good luck
-bc
|
|
|
Location:
Baulko Hillo
Registered:
April 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Tue, 07 December 2004 07:13
|
|
|
The final thing holding the dash in is usually....... The speedo cable! get your hand around there and unclip it where it goes into the back of the dash.
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Tue, 07 December 2004 14:46
|
|
got it out, have to put it on a angle 
its all happy now that its free (no cracks  )
now my next question is how to remove a ae86 dash
cheers
|
|
|
I supported Toymods
Location:
Perth, WA
Registered:
May 2003
|
|
Re: removing speedo cable (the ae71 story)
|
Wed, 08 December 2004 04:09
|
|
the dash or the cluster?
the dash has a bout of million screws holding it in, with about half of them hidden
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 09 December 2004 06:22
|
|
|
instramental cluster, just need to replace the speedo with the ae71 cable
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 09 December 2004 06:57
|
|
any tips or tricks to remove the inst cluster?
i have taking out about 6 screws (3 on stop and 3 on bottom?)
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 09 December 2004 07:23
|
|
omg why didnt any one mention that the ae86 and ae71 speedo cables are totaly different
any other ways to fit a speedo?
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 09 December 2004 07:45
|
|
|
is there anyway to adapt the ae71 speedometer into the ae86 instcluster?
|
|
|
Location:
Sydney, Hurstville, Pensh...
Registered:
August 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 09 December 2004 09:52
|
|
|
not sure what the ae86 one is like, yet is it posible to pull the spedo out of the ae86 cluster, if so would it fit were u can take out the one from the ae71?
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 09 December 2004 10:21
|
|
well, its totally different
ill post pics up later of what it has become 
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
|
Location:
Melbourne - NthSubs
Registered:
January 2004
|
|
Re: removing speedo cable (the ae71 story)
|
Thu, 09 December 2004 12:59
|
|
nah thing is out, probly typed it up wrong, ANYWAYS:
/ /
|
|
|
