Author | Topic |
Banned user
Location: ADELAIDE - The Drift City
Registered: July 2002
|
[AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 04:06
|
|
Specifications
Car: 1983 Toyota Sprinter, Australian delivered Levin
Engine: CA18DET from S13 Silvia, Rebuilt from bottom end to head with new rings, new bearings, cleaned up head etc. Stock pistons remain for now. ECCS butterflys removed from intake, Stock ECu and plenum. Turbocharger is an Rb20det M Spec Roller bearing unit with a T3 flange welded onto the CA manifold.
Apexi Hybrid Intercooler from S13 Sr20 spec, Flows and efficient to 230 rwkws, Custom pipe work. Blue cam covers and polished belt cover for extra drift points also.
Drivetrain:
Exedy Racing Clutch – 5 Puck Sprung Brass clutch, SR20DET gearbox with CA bellhousing, T-18 diff housing with TA22 Celica 4.1 diff ratio, New bearings and fitted with a brand new TRD 2 way LSD.
Brakes S13 SR20 Spec with Trust Pads
Wheels: Buddy Club P1 Racing Wheels 15X7, 3.7 Kg per rim
SSR Reverse Mesh 15X7
Advan Oni’s 15X7
Suspension:
Front:
Tein HE Body Adjustable Coilovers with 12 kg/mm springs, Modified S13 lower control arms with Rose jointing, Modified AE86 crossmember to give better roll center with redrilled pick ups. S13 Hubs, New bushes, Modified Castor rods, KE70 rack with Tie Rod extensions for more lock
Rear:
Cusco 7kg/mm 210mm free-height spring, spring rubbers removed, TRD Blue 8 way adjustable short stroke shock absorbers fitted with hard utherane bushes. Whiteline panhard rod, Adjustable lower trailing arms to adjust pinion angle. Longer wheel studs from Mitsubishi Sigma fitted, 5mm wheel spacer. Cusco 4 point Roll Cage, Cusco Adjustable Rear Strut brace.
Interior: Umm, theres two seats, a shifter, a wheel and that’s about it
Exterior: Custom Panel beating, Matte Black paint with stickers (all due to be changed soon, new colour coming in very near future)
Special Thanks to the following:
Japanese Motor Sports www.japanesemotorsport.com.au
2 Rosberg Road, Wingfield, Adelaide, South Australia, 5013
Phone +618 8260 6919 Fax +618 8260 5000
A-Spec Performance and Tuning
Ph: 0418 999 346 – Steve Grant
Exedy Clutch www.exedy.com.au
|
|
|
Location: East Maitland NSW
Registered: December 2004
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 04:24
|
|
hi
nice mods man
i was just wondering have you ever tried speedway driving
|
|
|
Banned user
Location: ADELAIDE - The Drift City
Registered: July 2002
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 04:25
|
|
|
|
|
Banned user
Location: ADELAIDE - The Drift City
Registered: July 2002
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 04:28
|
|
never tried competing in speedway, but have driven a speed way car when i was 16, loved it
|
|
|
Location: Melbourne
Registered: January 2003
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 04:40
|
|
Thats funny those rims in the pics look like some cheap crappy home brand mesh ones , not p1's or ssr , advan ones
|
|
|
Banned user
Location: ADELAIDE - The Drift City
Registered: July 2002
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 04:43
|
|
least they match the back SSR's
|
|
|
Location: Adelaide
Registered: August 2003
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 05:51
|
|
When you got your diff centre set up with the LSD, did you just give the TA22 centre and LSD to them and they set it up? Will the TA22 centre bolt straight into the T18 housing no problems?
Im thinking of doing the same thing as I already have T18 diff and a Cusco 2 way LSD arriving soon.
|
|
|
I supported Toymods
Location: Perth, WA
Registered: May 2003
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 06:25
|
|
any t series centre and carrier will bolt into another.
some times the splines might be different. ie. zenki and kouki centres
remove a 4.1:1 t series from a old celica(theres a few)
bring it into a diff shop and give them that and your brand new lsd. theyll swap it over and set the free play and shit
|
|
|
Location: Adelaide
Registered: August 2003
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 07:39
|
|
Cool, just checking before I get a centre all set up and realise it wont fit into my housing
Thanks for the help
|
|
|
I supported Toymods
Location: sydney.au
Registered: August 2002
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 09:05
|
|
what a piece of crap!~
just kidding
looked fucking sweet at vic banzai
|
|
|
Banned user
Location: ADELAIDE - The Drift City
Registered: July 2002
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 09:23
|
|
skaney: as discribed, thats exactally what i did. got a TA22 celica open diff 4.11 ratio from Cool1 on this forum in brisbane. got my brand new TRD two way, bought a bearing kit from CBC to suit and took all three items to a diff rebuilded who rebuilt the TA22 center with new beaqrings, fitted the LSD and set the lash.
it cost me 280 including bearings to do that. not too bad i thought.
Garth: yes it is a POS. respray coming very soon
|
|
|
I supported Toymods
Location: sydney.au
Registered: August 2002
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 09:30
|
|
colour?
|
|
|
I supported Toymods
Location: Perth
Registered: October 2003
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 11:34
|
|
I never really liked the matt black, liked how it was originally, but hopefully you can get some crazy colour
|
|
|
Location: qld
Registered: October 2003
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 20:40
|
|
Simon-AE86 wrote on Fri, 24 December 2004 20:23 |
Garth: yes it is a POS. respray coming very soon
|
yeh simon but all drift cars end up looking like that anyway, a new paintjob will only last a couple of race meets then meh shitter again, thats what im expecting with mine, already had 4-5 people say they wanna rub the pink car just to make it not so pretty!
Oh yeh this car rocks, very capable car driver combo!
|
|
|
Location: Canberra
Registered: October 2004
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 22:34
|
|
I was after those Kosei K1 (i think thats what they are called)rims for my TA22 but couldn't find a place in Australia to get some So I was just wondering where you got your hand on that rim?
|
|
|
Location: Adelaide
Registered: January 2004
|
Re: [AE86] Simon-AE86's Drift Car
|
Fri, 24 December 2004 23:22
|
|
The matt black is better than the white before, because simon never washes it, it was always brown before!
oh and simon didnt u sell that cusco adjust rear brace? u got the a spec one in there
|
|
|
Banned user
Location: ADELAIDE - The Drift City
Registered: July 2002
|
Re: [AE86] Simon-AE86's Drift Car
|
Sat, 25 December 2004 10:54
|
|
yep and yep
|
|
|
Location: Forster NSW
Registered: September 2004
|
Re: [AE86] Simon-AE86's Drift Car
|
Sun, 26 December 2004 02:14
|
|
I'm a bit worried about that holden oil filter you're using there...
Just kidding mate, nice project!
|
|
|
Banned user
Location: ADELAIDE - The Drift City
Registered: July 2002
|
Re: [AE86] Simon-AE86's Drift Car
|
Sun, 26 December 2004 11:09
|
|
RB30 oil filter to be exact
|
|
|