Author | Topic |
Location: Launceston, Tasmania
Registered: October 2003
|
ma61 Supra Tailshaft WTB
|
Tue, 31 August 2004 09:52
|
|
I need an ma61 Supra tailshaft in g.c. It must be Supra and not ra60 Celica which does fit but have smaller weaker uni joints and as I've just found out are no match for the 1j's torque!
Rich
|
|
|
Location: Launceston, Tasmania
Registered: October 2003
|
Re: ma61 Supra Tailshaft WTB
|
Wed, 01 September 2004 06:56
|
|
Anyone?
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
Re: ma61 Supra Tailshaft WTB
|
Wed, 01 September 2004 07:12
|
|
Get a custom one built, then it shall never break
|
|
|
Location: Launceston, Tasmania
Registered: October 2003
|
Re: ma61 Supra Tailshaft WTB
|
Wed, 01 September 2004 07:29
|
|
No worries, give me the $1200 I was quoted to build an unbreakable 2 piece tailshaft with all new bearings and uni's and I will do it. If you know anyone who does it cheaper and will ship to Tas. etc let me know or alternatively find me a tailshaft
Rich
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
Re: ma61 Supra Tailshaft WTB
|
Wed, 01 September 2004 07:31
|
|
Just do a single piece, and use hilux uni's
That should cost around the 600 mark max
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: ma61 Supra Tailshaft WTB
|
Wed, 01 September 2004 10:15
|
|
manual or auto shaft?
i have both, uni's are pretty average though, and should be replaced. probably cost you about 200 to do that. offers?
ed
|
|
|
Location: brisbane
Registered: August 2004
|
Re: ma61 Supra Tailshaft WTB
|
Wed, 01 September 2004 11:02
|
|
have you tried one from a ra65 they are different to ra60 cos ra60 has solid axle
i have used a supra manual tailshaft before on a auto ra65, same length and uni joint clamp bolt holes line up exactly
|
|
|
Location: Brisbane (Northside)
Registered: December 2004
|
Re: ma61 Supra Tailshaft WTB
|
Fri, 31 December 2004 02:35
|
|
Brisbane Drive Shafts quoted me about $600 for a custom one piece....
|
|
|
Location: Sunshine Coast Queensland
Registered: October 2003
|
Re: ma61 Supra Tailshaft WTB
|
Fri, 31 December 2004 03:28
|
|
Sunshine coast driveshafts did my rally car one piece for $280.
|
|
|
I supported Toymods
Location: Perth, Western Australia
Registered: December 2002
|
Re: ma61 Supra Tailshaft WTB
|
Fri, 31 December 2004 04:12
|
|
LOOK AT THE FUCKEN DATES PEOPLE!!!
|
|
|
Location: Sunshine Coast Queensland
Registered: October 2003
|
Re: ma61 Supra Tailshaft WTB
|
Fri, 07 January 2005 09:09
|
|
CLG wrote on Fri, 31 December 2004 15:12 | LOOK AT THE FUCKEN DATES PEOPLE!!!
|
And your point is?
|
|
|
I supported Toymods
Location: Perth, Western Australia
Registered: December 2002
|
Re: ma61 Supra Tailshaft WTB
|
Fri, 07 January 2005 09:16
|
|
If you need to ask, you'll never understand or agree, so why bother?!?
|
|
|
Location: Sunshine Coast Queensland
Registered: October 2003
|
Re: ma61 Supra Tailshaft WTB
|
Sun, 09 January 2005 13:44
|
|
CLG wrote on Fri, 07 January 2005 20:16 | If you need to ask, you'll never understand or agree, so why bother?!?
|
I could see no post by the author stating that he had found what he was after and i know that some things can take months of searching to find.
However if late replies cause you angst i shall do my best to refrain from them in future.
|
|
|