| Author | Topic |
|---|
I Supported Toymods
Location:
perth
Registered:
September 2002
|
|
surge tank install questions (ae93)
|
Wed, 29 December 2004 08:49
|
 |
Hey all, im "reviving" my post as i finally scored a VL-turbo pump for $50 so im ready to rid myself of that horrible surge!!!
I have a small (~1L) surge tank with a bracket attacked to it which perfectly holds the VL-turbo pump.
We're thinking of going DIY but as always ive never installed a goddamn surge tank before. Just want to check where to physically mount the thing.
Can I weld it to the (dry and aired) fuel tank just where the wires powering the intank pump are? Or just the chassis nearby??
Should i weld, cable tie , blue tack it or what? 
Anyone with an AE93/92 surge tank existing setup??
Cheers ppl
|
|
|
Registered:
August 2004
|
|
Re: surge tank install questions (ae93)
|
Thu, 30 December 2004 04:01
|
|
|
Im curious to know aswell, as just fitted a VL turbo pump to my AE93 (gze didnt like ge fuel pump) and whenever i corner hard , even with full tank i get bad fuel surging.
|
|
|
Location:
perth
Registered:
August 2004
|
|
Re: surge tank install questions (ae93)
|
Sun, 02 January 2005 10:20
|
|
just bolt it to the boot floor
or sell it to the more needy eg me 
|
|
|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: surge tank install questions (ae93)
|
Sun, 02 January 2005 11:16
|
|
I think legally you can't have the surge tank in the cabin... i've also heard the engine bay is a no go zone as well, however, this one has never been confirmed.
Welding to the tank would probably be a good idea so long as when installed the surge tank will not easily get hit if you run over something.
|
|
|
