Author | Topic |
Location: W.A
Registered: October 2004
|
Sticky lifters i think
|
Sun, 09 January 2005 05:48
|
|
My G/f has a 92 mazda 626 V6 2.5L i recently serviced it and switched fom unsinthetic to semi-sin oil, ever since have had a tapping noise very bad on start up but it settles as the car warms but doesnt go away completely, am thinky sticky lifter or valve tapping, how can i test this without taking the engine apart, the tapping is coming from right near the cam pully and is a bugger to get to, this engine is a bitch to work on, is there any way, short of running some DEX 3 in the engine to stop or source this tapping???
|
|
|
I supported Toymods
Location: Sutho/Hills NSW
Registered: September 2002
|
Re: Sticky lifters i think
|
Sun, 09 January 2005 20:36
|
|
nulon has some lifter additive
any auto shop should carry it
|
|
|
Location: W.A
Registered: October 2004
|
Re: Sticky lifters i think
|
Mon, 10 January 2005 11:14
|
|
Normally dont trust additives but if its last resort will try it
|
|
|
Location: central coast nsw
Registered: November 2004
|
Re: Sticky lifters i think
|
Mon, 10 January 2005 11:55
|
|
if the motor has been using normal oil since new keep using it.i had a 98 fairlane v8 as a company car and changed over to sinthetic at 120000ks and the result NO OIL PRESSURE when warmed up.changed back to mineral oil and back to normal...
|
|
|
Location: W.A
Registered: October 2004
|
Re: Sticky lifters i think
|
Tue, 11 January 2005 11:44
|
|
the thought past my mind, however it is only semi-synthetic
|
|
|
Location: Brisbane
Registered: June 2003
|
Re: Sticky lifters i think
|
Tue, 11 January 2005 12:23
|
|
run some upper cylinder lube in your fuel and see if that helps..if this is the same as a eunos motor, my sister's 2.0L has the problem too...turd of a motor
Blake
|
|
|
Location: Montrose, VIC
Registered: May 2002
|
Re: Sticky lifters i think
|
Tue, 11 January 2005 12:28
|
|
Not a patch on the ol' 302 ey
|
|
|
Location: Brisbane
Registered: June 2003
|
Re: Sticky lifters i think
|
Tue, 11 January 2005 12:37
|
|
if it ever runs
|
|
|
Location: W.A
Registered: October 2004
|
Re: Sticky lifters i think
|
Wed, 12 January 2005 11:46
|
|
Is a bloody good engine though, it goes like stink!! 2.5L light weight V6 mongral to work on though its all packed in so tight
|
|
|