Author | Topic |
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
ma61 gearstick bushes
|
Sat, 15 January 2005 11:05
|
|
alright, give up the secret, how do I get this on?
after painstaking cleaning all the broken bits of bush that were wedged in the spring, I'm lost. I got the small clear on on (with a snap that made me think I'd broken it), but the large round black one does not look like it's meant to go on from the bottom - the metal ball on the gstick is too big. I've covered it in oil and given it a fair push, but apart from cracking noises coming from the glue holing the 2 layers of the bush together, I've had no luck.... help?
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sat, 15 January 2005 13:42
|
|
Well, I'm confused. One part (clearish white) goes on the very end of the shifter - sounds like you've done that - the other one (black/green) is the cup that the shifter ball sits in, and that goes in the gearbox
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sat, 15 January 2005 13:48
|
|
AAaaahhhhhhh
now I understand why it wont fit over *grins*
put it down to not having had time off for ages
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sat, 15 January 2005 13:55
|
|
Lol!
I did grease them too - just plop it in the shifter hole - IIRC it has 4 little indentations aroun d the rim IIRC (or 2) to get past the shifter pivot pins*.
Interestingly, it didn't make a huge amount of difference in my car, and I expected it too - I suppose my original bushings weren't that bad... or it was supposed to be greased propely and I've already mashed it
*non-tecnhical term
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sat, 15 January 2005 14:08
|
|
yeah - mine has been totally without this bush (I think), and judging by the condition of the other gbox bush (the white one) the other will need replacing too. and for $<10, why take a chance?
I know the indentations you're talking about
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sat, 15 January 2005 14:12
|
|
Under $10? Both set me back just over $30 from Toyota.
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sat, 15 January 2005 20:24
|
|
well, the cheap one was~$9, the expensive one ~$15
|
|
|
Registered: August 2002
|
Re: ma61 gearstick bushes
|
Sat, 15 January 2005 22:20
|
|
I just replaced both of them yesterday greg.
The hilux green/black bush is awesome because it actually make the spring compress more and the two dowels on the side of the extention have a better position in the shifter (compared to my previous bush.
It now means i have a self centering gearstick as well
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 02:23
|
|
BlackSupra wrote on Sun, 16 January 2005 09:20 | I just replaced both of them yesterday greg.
|
did it all fit ok with the new bush, glen?
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 04:57
|
|
my gearstick alwayws self-centreed... dunno what's wrong with yours
|
|
|
Registered: August 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 05:11
|
|
ed_ma61 wrote on Sun, 16 January 2005 13:23 |
BlackSupra wrote on Sun, 16 January 2005 09:20 | I just replaced both of them yesterday greg.
|
did it all fit ok with the new bush, glen?
|
Yep sure did, just in time to make 130.3rwkw.
And i like the flywheel
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 08:20
|
|
you happy with the bush? stick slop gone?
glad you like the flywheel. note: it will take a while for the clutch disc to face the flywheel and get a good bite, but yeah, give it time...
130rwkw is bloody good dude
|
|
|
Registered: August 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 08:24
|
|
ed_ma61 wrote on Sun, 16 January 2005 19:20 | you happy with the bush? stick slop gone?
glad you like the flywheel. note: it will take a while for the clutch disc to face the flywheel and get a good bite, but yeah, give it time...
130rwkw is bloody good dude
|
Slop is goooooooone, bush is awesome, he should really advertise that service on the net somewhere.
Yeah talk about bite hahaha sounded SOOOOO bad try to engage the clutch, like grinding first gear, the dyno attendant did it today as well infront of everyone, not a very happy sound.
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 08:29
|
|
shit fuck
installed the new bush and suddenly my gearstick wont centre!
what on earth could cause this?
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 08:47
|
|
BlackSupra wrote on Sun, 16 January 2005 19:24 |
Slop is goooooooone, bush is awesome, he should really advertise that service on the net somewhere.
|
he does, its called me
nah, hes has no idea what's going on, i just give him the parts, and a little CAD of what i want, and away he goes
speaking of which - you owe me $ bitch!
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 09:28
|
|
How much does he owe you?
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 09:36
|
|
help me
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 09:46
|
|
justcallmefrank wrote on Sun, 16 January 2005 20:28 | How much does he owe you?
|
how much do i owe you?
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 09:53
|
|
Haha, I don't know, I just wanna know what it'd cost to have my gearstick tight as a nuns **** like yours.
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 09:59
|
|
greg, is the spring now too tight, and preventing the stick from moving freely? on some boxes ive found i had to take the little balck ring off the bottom of the bush, and just install the green bit... the preload the extra hieght of this bush puts on the spring can sometimes be too much??
nath - probably about $25-$30 - but you need to send me your existing shift yoke to do it...
OR if someone can give me a spare yoke up front that i can keep, we can do it on an exchange basis, reducing the downtime
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 10:03
|
|
ed_ma61 wrote on Sun, 16 January 2005 17:59 |
nath - probably about $25-$30 - but you need to send me your existing shift yoke to do it...
OR if someone can give me a spare yoke up front that i can keep, we can do it on an exchange basis, reducing the downtime
|
Shall see what I can do.
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 10:11
|
|
ed - that fixed up shift yoke sounds like something I'd like too
I dont have a spare at the moment however.
|
|
|
Registered: August 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 11:22
|
|
Requires pulling the gearbox apart.....mmmm good times
well how much do i owe you bitch!
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 11:26
|
|
sigh!
stupid car
always ways to make it better, and it always want to improve it.
on the plus side, my phat arse intercooler is going in in the next few days.
mmm - expensive silicone bends.
|
|
|
Location: Lost in the K hole
Registered: May 2002
|
Re: ma61 gearstick bushes
|
Sun, 16 January 2005 11:33
|
|
BlackSupra wrote on Sun, 16 January 2005 22:22 | Requires pulling the gearbox apart.....mmmm good times
well how much do i owe you bitch!
|
hows $25 plus your precious 'petrol money' sound?
|
|
|