Toymods Car Club Inc: Tech & Conversions => best ecu for GZ

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » best ecu for GZ Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Location:
Brisbane (AUS)
Registered:
August 2003

best ecu for GZ	Mon, 07 February 2005 06:36

Hey guys just lookin for peoples opionons on the best ecu for a 4agze with the best power gains and what you guys have experienced with that computer standalone or piggy back. thanks [Report message to a moderator]

CrUZsida
Forums Junkie

I supported Toymods

Location:
Australia
Registered:
November 2003

Re: best ecu for GZ	Mon, 07 February 2005 09:04

Microtech seems to be the flavour for "A" motors [Report message to a moderator]

Location:
Brisbane (AUS)
Registered:
August 2003

Re: best ecu for GZ	Mon, 07 February 2005 10:00

any opionons on the best model micrtec and have you seen good increase in power with this. [Report message to a moderator]

sideshow
Forums Junkie

Location:
sydney
Registered:
March 2003

Re: best ecu for GZ	Mon, 07 February 2005 10:03

you can only get a lt10 these days for 4cyl which comes with ignitor unit most old models are not being made anymore you might gain alittle but not much unless u start going for bigger pulley and shit like that [Report message to a moderator]

Location:
Brisbane (AUS)
Registered:
August 2003

Re: best ecu for GZ	Mon, 07 February 2005 10:08

what do you think about the greedy e manage piggy back fuel comp is this a good choice for my gz [Report message to a moderator]

sideshow
Forums Junkie

Location:
sydney
Registered:
March 2003

Re: best ecu for GZ	Mon, 07 February 2005 10:14

unless u will put bigger puylley and exhaqust and other shit juyst keep it standard unless the person is a perfect tuner all u end up doin is using more fuel for little gain [Report message to a moderator]

Location:
Brisbane, Australia
Registered:
May 2004

Re: best ecu for GZ	Mon, 07 February 2005 10:26

I dunno.... I think I'd gain power and save fuel with a microtech. With the factory computer, at WOT the AFR sits steadily @ 10:1. [Report message to a moderator]

sideshow
Forums Junkie

Location:
sydney
Registered:
March 2003

Re: best ecu for GZ	Mon, 07 February 2005 10:28

well then make sure u tell the tuner to do a good job and tune the cruise section good so many times i here some tuners just do a quick rough job and u get bad fuel economy [Updated on: Mon, 07 February 2005 10:28] [Report message to a moderator]

Previous Topic:	Diff adn Gearbox Oil
Next Topic:	2T ignition advance

Current Time: Sun May 19 23:04:35 UTC 2024

Total time taken to generate the page: 0.0045690536499023 seconds

.:: Contact :: Home ::.