Author | Topic |
Registered: December 2004
|
fitting charcoal canister on 4age
|
Wed, 09 February 2005 07:46
|
|
just got my new hachi, and all that needs to be done for rwc is fix leaking catch can (fixed) and fitting of charcoal canister...
The only problem is is that it no longer uses an efi setup, replaced by two 45mm webers.. i have NO idea how to fit this, and i dont particularly want to take it to mechanic and pay money to fix a part that is going to be ripped off in a day or two anyway
any help (pictures would help wonders too) is greatly appreciated
cheers
Lyndon.
|
|
|
Location: NSW, East Coast
Registered: July 2003
|
Re: fitting charcoal canister on 4age
|
Wed, 09 February 2005 09:19
|
|
Although you arent using efi a charcol canister must still be used for legal reasons, there should be a vapour line from your fuel tank, find it, follow it to the engine bay, secure a charcol canister and run a line to a empty slot on you webbers.
Couldnt be simpler really, hardest thing will be finding vapour line and spot on the webbers.
If you have no luck here, try on the http://www.club4ag.com/ forums.
Cheers
Steve
|
|
|
Registered: December 2004
|
|
|
Location: NSW, East Coast
Registered: July 2003
|
Re: fitting charcoal canister on 4age
|
Thu, 10 February 2005 06:50
|
|
SirLyndon wrote on Thu, 10 February 2005 06:43 | thanks Steve!
thats the problem im going to have ive been told (although havent searched throughly) that there is no provision for such line on the webers... gonna have a look when i wake up this arvo and if not, send it to the place i got the rwc inspection done and let them have a crack at it..
also.. on this canister there is 3 nozzles... whats the bloody third fucker for?
once again, cheers!
Lyndon.
|
"The 3rd nozzle" i have no idea, maybe you need to adapt a small metal pipe (nozzle) to the webbers somehow and run your line there, time to crack open the old tig welder me thinks.
Cheers
Steve
|
|
|