Author | Topic |
Location: mackay
Registered: August 2004
|
MK2 Supra Cam timing
|
Fri, 18 February 2005 23:34
|
|
hey ya'll. ok pulled apart my 5M-E, new HG, put it back together and she wont run. just turns over and over, tries to fire but just wont get up and go. have full spark, new leads & plugs, fuel is getting to the rail. injectors are injecting. so figured i messed up the cam timeing when i put it back together... Can anyone with the MK2 supra workshop manual scan the page(s) and post them, or send them to my email?? could there be anything else wrong??
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: MK2 Supra Cam timing
|
Sat, 19 February 2005 00:08
|
|
one moment....
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: MK2 Supra Cam timing
|
Sat, 19 February 2005 00:56
|
|
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: MK2 Supra Cam timing
|
Sat, 19 February 2005 00:57
|
|
and make shure your dizzy is not out and is firing cyl 1 when it should be
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
|
|
Location: mackay
Registered: August 2004
|
Re: MK2 Supra Cam timing
|
Sat, 26 February 2005 00:18
|
|
ok. i got a book over the weekend for the 5m-e and it had the same thing. ive set the cam up like that but it still wont start. does the oil pump make that big of a diff?? cause i think it mite have moved. do i HAVE to line it up or is that just something toy' want u to do??
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: MK2 Supra Cam timing
|
Sat, 26 February 2005 06:34
|
|
the oil pump drive is for the dizzy drive as well check your spark advance
Allan
|
|
|
Location: Brisbane
Registered: February 2003
|
Re: MK2 Supra Cam timing
|
Sat, 26 February 2005 08:48
|
|
or perhaps you are 180 degrees out on the crank?
if you have the rocker cover off, check that #1 is at TDC (both lobes pointing down and away from centre of head).
|
|
|
Location: mackay
Registered: August 2004
|
|
|