| Author | Topic |
|---|
Location:
QLD
Registered:
October 2004
|
|
how to make a ported box
|
Sat, 19 February 2005 00:35
|
 |
i need some info on how to make a ported box for 2 12's
i was sellin them but no one wants them so im boxing them nd droppin em in ma lancer
any one got any info or can any one here build them cuz i will pay top $$$ if they can build me a good box
cheers
justin
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: how to make a ported box
|
Sat, 19 February 2005 02:09
|
|
there are many excellent sites on building boxes around the net.. you can calculate sizes for whichever frequencies etc etc... different bandpass stuff...
anyway, just google for "ported sub box frequency" or similar
|
|
|
Location:
brisbane
Registered:
October 2004
|
|
Re: how to make a ported box
|
Sat, 19 February 2005 03:02
|
|
hmmm, well iv built a few boxes and honestly its
not really worth it unless you are after perfection
and a fair bit of time and money. there are many box
design programs (recommended) where you enter in various
specs and it will calculate a box for you - if
you want a competition system. for a bit of cruising
doof doof just go and buy a twin 12 box (>16mm mdf,
carpeted, holes cut, sealed, connections) for about
$120 or so
|
|
|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: how to make a ported box
|
Sat, 19 February 2005 05:53
|
|
|
Send us a link to the T&S parameters of your subs and I'll send you back a set of box plans calculated in Bass box pro.
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: how to make a ported box
|
Sat, 19 February 2005 06:03
|
|
|
i dont think this is what you are after, but using two 12s you could utilise a sealed isobaric setup.
|
|
|
Location:
Wollongong
Registered:
January 2005
|
|
|
Location:
QLD
Registered:
October 2004
|
|
Re: how to make a ported box
|
Sat, 19 February 2005 07:38
|
|
thanks guys i couldn't be fucked makin 1
so i whent 2 autobahn got a ported box for 2 12's for $240
its a bit steap but i needed it urgently
thanks again
justin
|
|
|
Location:
Wollongong
Registered:
January 2005
|
|
Re: how to make a ported box
|
Sat, 19 February 2005 07:55
|
|
Mine cost about $40 to make. But it did take some time.
You get what you pay for?
Good luck fella, may you have many years of doof, doof, doofing.
|
|
|
Location:
QLD
Registered:
October 2004
|
|
Re: how to make a ported box
|
Sun, 20 February 2005 03:11
|
|
ur setupo looks sic
nice camry
|
|
|
Location:
brisbane
Registered:
October 2004
|
|
Re: how to make a ported box
|
Sun, 20 February 2005 03:20
|
|
heaps of cheaper boxes than that, u should have a look
around
|
|
|
