| Author | Topic |
|---|
Location:
Camden
Registered:
May 2002
|
|
EOI 9" diff suit RA23/28
|
Sat, 19 February 2005 00:22
|
 |
|
Due to a change of circumstances looks like I have to sell my 9" diff i got made for my RA23. It has never been used and is ready to bolt in. It has been trial fitted. Has commodore disc brakes, axles have been re studded to celica pattern 4x114.3 .Has LSD with 4.1:1 ratio. All brackets have been transferred from stock diff onto the 9". Cost me $3200. Im in Sydney. Anyone interested??
|
|
|
Location:
Brisbane
Registered:
June 2003
|
|
Re: EOI 9" diff suit RA23/28
|
Sat, 19 February 2005 09:34
|
|
| Pube wrote on Sat, 19 February 2005 10:22 |
Due to a change of circumstances looks like I have to sell my 9" diff i got made for my RA23. It has never been used and is ready to bolt in. It has been trial fitted. Has commodore disc brakes, axles have been re studded to celica pattern 4x114.3 .Has LSD with 4.1:1 ratio. All brackets have been transferred from stock diff onto the 9". Cost me $3200. Im in Sydney. Anyone interested??
|
that is a fucken MO diff, nice work buddy - if only i had a hot ra23  Track width is significantly different to ma61 i believe tho 
|
|
|
Location:
Camden
Registered:
May 2002
|
|
Re: EOI 9" diff suit RA23/28
|
Sat, 19 February 2005 12:38
|
|
This is the only picture i have of it for now. Its in my RA23 when it was on its way to get sand blasted (without the diff installed!) Its a big tuff diff but id doubt it would be alot heavier than a hilux diff.
|
|
|
Location:
Brisbane
Registered:
June 2003
|
|
Re: EOI 9" diff suit RA23/28
|
Sat, 19 February 2005 13:26
|
|
| Pube wrote on Sat, 19 February 2005 22:38 |
This is the only picture i have of it for now. Its in my RA23 when it was on its way to get sand blasted (without the diff installed!) Its a big tuff diff but id doubt it would be alot heavier than a hilux diff.
|
itd also be a dickload tuffer..if only i didnt have IRS
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: EOI 9" diff suit RA23/28
|
Sat, 19 February 2005 22:01
|
|
|
How were the axels made to 4 stud, were thet billet axels used or were any holes they had in them welded and redrilled, or were the axels able to be purchased with that stud patter on the axel flanges. With the commodore rear disc brakes, how does your shock clear the caliper?
|
|
|
Location:
Camden
Registered:
May 2002
|
|
Re: EOI 9" diff suit RA23/28
|
Sun, 20 February 2005 08:37
|
|
|
Id have to take a closer look but i think the axles where welded and redrilled but i will get back to you on that. Initially i had issues with the shock clearing the caliper. It was easily fixed by relocating the shock mount slightly inboard, just enough to clear the caliper.
|
|
|
Location:
NSW
Registered:
August 2003
|
|
Re: EOI 9" diff suit RA23/28
|
Mon, 21 February 2005 00:36
|
|
Very interested, but I want it for my ae86.
Do you know what mods it would need to fit in my ae86.
PM me a ball park figure please.
John K.
|
|
|
Location:
Camden
Registered:
May 2002
|
|
Re: EOI 9" diff suit RA23/28
|
Fri, 25 February 2005 13:02
|
|
|
not enough genuine interest so i will be keeping the diff. NO LONGER AN EOI OR 4 SALE
|
|
|
