Author | Topic |
Location: Launceston, Tasmania
Registered: October 2003
|
ma61 F series LSD
|
Fri, 04 March 2005 02:31
|
|
I have the LSD centre only out of my car. This centre is in good condition and still turns both tyres on bitumen. This centre has NOT been drifted or even dragged. Have replaced with Torsen centre for track work.
$300.00 freight would be prob $20-$30 I reckon.
Please call for more details etc. 0407332944.
Cheers
Rich.
|
|
|
Location: Launceston, Tasmania
Registered: October 2003
|
Re: ma61 F series LSD
|
Mon, 07 March 2005 02:00
|
|
OK Price drop, how about $250. This LSD is really in good condition would suit ra65 celica or hilux.
Rich
|
|
|
Location: sydney
Registered: January 2005
|
Re: ma61 F series LSD
|
Mon, 07 March 2005 04:48
|
|
hey
would that fit in a ke55? cause im interested if it would
|
|
|
Location: Launceston, Tasmania
Registered: October 2003
|
Re: ma61 F series LSD
|
Mon, 07 March 2005 06:16
|
|
I really don't know I'm afraid. Maybe someone else on here can help with that question.
Rich
|
|
|
Location: Tassie
Registered: October 2003
|
Re: ma61 F series LSD
|
Tue, 08 March 2005 00:43
|
|
I'm just trying to get into contact with the person who did the work to my car so i can find out what diff it has i'm assuming u still have it ?
|
|
|
Membership Secretary
Location: Sydney
Registered: June 2002
|
Re: ma61 F series LSD
|
Tue, 08 March 2005 01:51
|
|
Ke rolla would only be a 6i t series diff I think you'll find
F series is 7.5 inch and in corona's, crowns, luxs and cressidas, supra's and Ra 65 celicas.
|
|
|
Location: Tassie
Registered: October 2003
|
Re: ma61 F series LSD
|
Tue, 08 March 2005 02:56
|
|
I've asked norbie if my SA63 has an F series Diff i have a feeling it doesn't but if it does then i'm in
|
|
|
Location: Adelaide
Registered: June 2003
|
Re: ma61 F series LSD
|
Tue, 08 March 2005 03:01
|
|
sa63 have a t series diff. but they both are irs and look the same from under the car. dose anyone know if you can unbolt the center from the sa63 an replace it with a ma61 one??
|
|
|
Location: Tassie
Registered: October 2003
|
Re: ma61 F series LSD
|
Tue, 08 March 2005 03:08
|
|
It looks like RA65's have f series diffs
|
|
|
Location: Adelaide
Registered: June 2003
|
Re: ma61 F series LSD
|
Tue, 08 March 2005 03:15
|
|
ra65 and ma61 have f series diffs, but the sa63 have a t series diff, which looks the same as the f series but has different internals.
|
|
|
Location: Tassie
Registered: October 2003
|
Re: ma61 F series LSD
|
Tue, 08 March 2005 03:35
|
|
Ohk thanks
|
|
|
Membership Secretary
Location: Sydney
Registered: June 2002
|
Re: ma61 F series LSD
|
Tue, 08 March 2005 22:43
|
|
Unfortunatley you can swap the centres, maybe you could look at bolting the F series from a ra65 or Ma61 to the Sa65 floor.
Or could you, I'm only guessing here after I pulled out a Ra65 diff for my crown, is to swap the rear crossmember that suppports the diff from a Ra65 to the Sa65. Are the chassis the same, you would then have the diff carrier for a F series diff.
Just a thought.
|
|
|
Location: Whyalla
Registered: June 2004
|
Re: ma61 F series LSD
|
Mon, 14 March 2005 10:30
|
|
Will this LSD centre swap straight into an 85 MX73 Cressida? Would you need anything else for it to swap in if so?
I've nearlly finished my 1JZ MX73 and really need all the traction I can get and heard that this swaps straight in
|
|
|
Location: townsville NQLD
Registered: February 2004
|
Re: ma61 F series LSD
|
Mon, 14 March 2005 10:40
|
|
check your build plate......if it says trans/axle: F** (eg. F302) then it is an F diff and this centre will fit
if it is a G (eg. G207) or an E (eg. E172) then it is a no go
i kno for fact the MX62's are E,
and the MX83 are G,
but not sure on the mx73's
brett
|
|
|
I supported Toymods
Location: Australia
Registered: November 2003
|
Re: ma61 F series LSD
|
Mon, 14 March 2005 11:11
|
|
woofa347 wrote on Mon, 14 March 2005 18:30 | Will this LSD centre swap straight into an 85 MX73 Cressida? Would you need anything else for it to swap in if so?
I've nearlly finished my 1JZ MX73 and really need all the traction I can get and heard that this swaps straight in
|
Yes
|
|
|