Author | Topic |
Location: Adelaide
Registered: March 2005
|
RA60 auto to manual conversion
|
Sat, 12 March 2005 00:33
|
|
Hey not sure if this topic been done b4 but i'm looking to buy a RA60 but it is auto. I've already got a manual one but the body on the auto is heaps better so was wondering if it would be much trouble to pull the auto out and swap in the manual and clutch etc??? Will i have to cut holes or anything (firewall)??
|
|
|
Location: VIC, Sth Frankston.
Registered: July 2003
|
|
|
Location: Adelaide
Registered: March 2005
|
Re: RA60 auto to manual conversion
|
Sat, 12 March 2005 01:34
|
|
Cheerz thats what i was hoping to hear.
ViPeR_NiPPleX wrote on Sat, 12 March 2005 12:18 | pretty straight forward
swap in clutch and brake pedal from manual one, holes should already be in the firewall either plugged with rubber things or not drilled yet.
thats prolly the hardest part then just swap in the box and replace the gearstick surrounding with the manual one.
hey presto.
EDIT: forgot tailshaft too... and ur diff ratio maybe different...
|
|
|
|
Location: Sydney, northshore
Registered: June 2004
|
Re: RA60 auto to manual conversion
|
Mon, 14 March 2005 00:52
|
|
its not quite as simple as that...
~ im in the middle of an almost identical swap right now and finding some of the bits needed is a c&^t.
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: RA60 auto to manual conversion
|
Mon, 14 March 2005 01:02
|
|
damz wrote on Mon, 14 March 2005 08:52 | its not quite as simple as that...
~ im in the middle of an almost identical swap right now and finding some of the bits needed is a c&^t.
|
It is?
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: RA60 auto to manual conversion
|
Mon, 14 March 2005 11:42
|
|
Wrecked RA60's are as common as dirt around here... I'm surprised you're having any problems.
|
|
|