Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 1jz power outputs

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
tyottsoarer
Regular


Location:
Gold Coast
Registered:
June 2004
1jz power outputs Sun, 20 March 2005 12:05 Go to next message
Just after some peoples guesses on power outputs with these common 1jz mods. Assume the car is manual (r154). I'm guessing the car itself is irrelevant.

STAGE 1

1.0 bar of stable boost (any digital controller)
Front mount intercooler
standard "y" pipe
3" exhaust and 3" high flow cat
440cc 2jz injectors
SAFC II, with a suitable tune for all pre-mentioned mods

Estimation of 230rwkw

STAGE 2

Higher capacity fuel pump
High flowed, steel wheeled ct12a turbos
3" dump pipe
Boost increased to the maximum efficiency of the modified ct12a
SAFC II, with a suitable tune for all pre-mentioned mods

Estimated power 250rwkw?

STAGE 3

Adjustable cam gears
256 degree cam shafts on inlet and exhaust
SAFC II, with a suitable tune for all pre-mentioned mods

Estimated power ???rwkw

Basically after peoples guesses on the power output on each stage, also suggestions on parts not covered that may have been missed.






  Send a private message to this user    
manmx83
Regular


Location:
Brisbane
Registered:
July 2004
Re: 1jz power outputs Sun, 20 March 2005 12:52 Go to previous messageGo to next message
stage one is about right provided you swap in dump pipes and swap out 440cc injectors.
You can do that power level on stock injectors [or 225rwkw at 15psi] but need a good flow exhaust.
Your turbos will thank you with a long and happy life due to reduced back pressure and associated heat.
I am not guessing or using second hand info,I am quoting my setup.I believe you should have a bigger fuel pump right away also,Walbro is good.[for soarer dump pipes Lew of Marlew Engineering I think]

Stage 2,wow if you only get 20 or 30 rwkw for 2000 bucks worth of steel wheel hi flo ct12a's you wouldnt do it,surely? I would also like to know what these are capable of and how they would compare with nissan turbos like little GTR t28's which can do a combined 500hp at the flywheel [two] or t28's off an rb20.I dontb pretend to know a lot about these,quoting stuff s/hand here.[see "gtr t28" search for sale engines etc]
Stage 3 you would be looking for some control over ignition timing as well.
Should get plenty of replies,Cheers.Pete.

[Updated on: Mon, 21 March 2005 18:18]

  Send a private message to this user    
tyottsoarer
Regular


Location:
Gold Coast
Registered:
June 2004
Re: 1jz power outputs Sun, 20 March 2005 12:58 Go to previous message
250rwkw was a conservative guess, I have no idea what they are capable of flowing to or what their maximum boost efficiency is but thanks a lot for your power quote manmx83
  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:1jz MX83 Questions
Next Topic:Lengthening control arms
Goto Forum:
-=] Back to Top [=-

Current Time: Tue May 7 12:53:53 UTC 2024

Total time taken to generate the page: 0.0048561096191406 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.