Author | Topic |
Location: Melbourne
Registered: November 2003
|
|
|
Location: Melbourne
Registered: October 2004
|
Re: clutch ? no idea
|
Mon, 21 March 2005 09:13
|
|
give it a couple of weeks?
|
|
|
Location: Kita-Ku, Sapporo, Japan
Registered: January 2003
|
Re: clutch ? no idea
|
Mon, 21 March 2005 10:09
|
|
pressure plate or friction plate was changed?
maybe you have overheated the pressure plate and it has lost clamping force?
|
|
|
Location: Melbourne
Registered: November 2003
|
Re: clutch ? no idea
|
Mon, 21 March 2005 13:57
|
|
devolutio wrote on Mon, 21 March 2005 20:13 | give it a couple of weeks?
|
yea we are thinking that, thinking that it is glazed
oldcorollas wrote on Mon, 21 March 2005 21:09 | pressure plate or friction plate was changed?
maybe you have overheated the pressure plate and it has lost clamping force?
|
nar both plates were new and not sure could have overheated, got 2 pull it out and have a looksee if it is not better after i run it around abit.
|
|
|
I supported Toymods
Location: Frankston, Victoria
Registered: April 2004
|
Re: clutch ? no idea
|
Tue, 05 April 2005 16:55
|
|
probably burned it away man, didnt take much to burn my old ke70 clutch, and then it did the same thing, grips in 1st 2nd and 3rd but once u get into 4th if you put your foot down to the floor at lower revs it will just slip like a mofo, then u let go of the accelerator and it grips again... REALLY annoying, especially when you are on a toyota cruise doing 80 in a 100 zone holding back half the pack cause you dont have enough torque to make the clutch grip
|
|
|