| Author | Topic |
|---|
Location:
Rockingham
Registered:
February 2005
|
|
1JZ-GTE Std Turbochargers....
|
Wed, 23 March 2005 08:04
|
 |
Stock turbos coming of my car shortly..... done 91000kms on a Toyota Cresta JZX-90
Pics available on request...
$300.00 + Postage
|
|
|
Location:
Melbourne Australia
Registered:
June 2003
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Wed, 23 March 2005 23:38
|
|
|
sorry to be a retard man but what turbo is actually on that? is it a ct26???
|
|
|
Location:
Rockingham
Registered:
February 2005
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Thu, 24 March 2005 00:56
|
|
|
hehehe the code is actually CT12A, CT26 is of the 7M-GTE engine.....
|
|
|
Location:
Melbourne Australia
Registered:
June 2003
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Thu, 24 March 2005 07:31
|
|
thansk man,, there is no fucken chance that thing is bolting onto my 3s is there  haha
was looking at the turbo on my old mans 1jz soarer, they just ditched the whole hose clamp idea and bolted everything on with that, would take too much fabrication to make hte bitch fit, i cna't be stuffed
|
|
|
Location:
Melbourne
Registered:
March 2004
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Thu, 24 March 2005 08:23
|
|
|
How much h/p are these turbos suppose to flow.
|
|
|
Location:
Rockingham
Registered:
February 2005
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Thu, 24 March 2005 08:45
|
|
| joeninety wrote on Thu, 24 March 2005 16:23 |
How much h/p are these turbos suppose to flow.
|
on my auto at 11psi boost I have pulled 191rwkw on a dyno in shootout mode.... with the right setup some ppl on these forums haven seen around 240rwkw+ with ceramic turbine wheels....
|
|
|
Location:
Adelaide
Registered:
November 2004
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Thu, 24 March 2005 16:35
|
|
|
ct12`s from 1gggte engine 2litre six twin turbos have steal turbine shafts but are a much smaller turbo than ct12A that are on 1jzgte but best thing to do is put steal shaft into ct12A`s good for over 1.5bar. bigger compresor housing.
|
|
|
Location:
sydney
Registered:
June 2004
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Fri, 25 March 2005 06:09
|
|
| Kingpin777 wrote on Wed, 23 March 2005 19:04 |
Stock turbos coming of my car shortly..... done 91000kms on a Toyota Cresta JZX-90
Pics available on request...
$300.00 + Postage
|
does it come with the manifold
|
|
|
Location:
Rockingham
Registered:
February 2005
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Thu, 31 March 2005 04:06
|
|
|
yeh mate with all the lines manifold, dump pipe etc
|
|
|
Location:
melb
Registered:
June 2003
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Sat, 02 April 2005 10:05
|
|
|
pm sent
|
|
|
Location:
Brisbane
Registered:
July 2004
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Sun, 03 April 2005 14:45
|
|
a very short time age these turbos were five or six hundred dollars for a good set with fittings,dont understand people selling so cheap. 
|
|
|
Location:
Rockingham
Registered:
February 2005
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Mon, 04 April 2005 02:14
|
|
Your right mate... I just wanna get rid of mine... I have a HKS T3G kit waiting at home to be bolted on... 
|
|
|
Location:
Kelmscott, Perth, W.A
Registered:
March 2004
|
|
Re: 1JZ-GTE Std Turbochargers....
|
Tue, 05 April 2005 02:12
|
|
|
pete youve seen alot of 1j turbos... are they all the same oil and coolant fittings across all models? ie are these gaurenteed to fit perfectly to a 91 jza70? i think it would be pretty annoying if you get them all bolted up then find one s/s oil line is different!
|
|
|
