| Author | Topic |
|---|
On Probation
Location:
launceston tas
Registered:
March 2005
|
|
3tc + ke70 = what
|
Tue, 29 March 2005 10:54
|
 |
im thinkn about going up to my local wrecker and getting this t18 that i saw and i was thinkin about getting the 3t and gearbox and putting it in a ke70 or a ke30 but i dunno what it would fit into easier im guesing the ke70 but i wouldnt know can someone plz tell me more about this conversion and if anyone has done it can i have some fotos
thanks guys
|
|
|
Location:
Kilsyth, Melbourne
Registered:
September 2004
|
|
Re: 3tc + ke70 = what
|
Wed, 30 March 2005 05:16
|
|
i assume the 3tc wil fit into the ke30 because everyone tells me that a 2tg will bolt rite in so i don't see y the 3t won't
-Calvin
|
|
|
Location:
brisbane
Registered:
October 2004
|
|
Re: 3tc + ke70 = what
|
Sat, 02 April 2005 00:30
|
|
any particular reason you'd do this? i dunno id be opting
for a 2tg...
|
|
|
Location:
Tasmania, Evandale
Registered:
April 2005
|
|
Re: 3tc + ke70 = what
|
Sat, 02 April 2005 06:36
|
|
|
well i dont see y it wouldn't fit when comparing it to my Toyota TE72 T-18 it would have the simalar mouts to hold the 3TC, they go hard ill tell ya that much
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: 3tc + ke70 = what
|
Sat, 02 April 2005 08:24
|
|
yeah those 3tc's go pretty hard 
|
|
|
Location:
Tasmania, Evandale
Registered:
April 2005
|
|
Re: 3tc + ke70 = what
|
Sun, 03 April 2005 01:00
|
|
|
they'll whithstand heaps of thrashing over a long period of time and they will still go
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: 3tc + ke70 = what
|
Sun, 03 April 2005 02:30
|
|
|
yeah you cant kill em thats for sure!
|
|
|
Location:
Brisbane
Registered:
July 2004
|
|
Re: 3tc + ke70 = what
|
Sun, 03 April 2005 03:42
|
|
i'll vouch for the engine, i have given it a whole heap of thrashing in my ta22, but i don't think the clutch was up to the task.....however, opting for a 4age smallport conversion...easier to upgrade, get parts for and cheaper on fuel....
Strong engine, i'll give it that, ran without oil for a bit, then kept going......hehe
Crok.
|
|
|
On Probation
Location:
launceston tas
Registered:
March 2005
|
|
Re: 3tc + ke70 = what
|
Mon, 04 April 2005 07:30
|
|
yah but money for a 4age is an issue for me 
|
|
|
Location:
Tasmania, Evandale
Registered:
April 2005
|
|
Re: 3tc + ke70 = what
|
Thu, 07 April 2005 00:40
|
|
|
well thats an issue for most people around these days
|
|
|
Location:
Launceston
Registered:
March 2005
|
|
Re: 3tc + ke70 = what
|
Thu, 07 April 2005 13:16
|
|
|
whats wrong with the 4afe its cheaper and more available? still twin cam 16v but just a narrow head, if moneys an issue id go that. or a shitty 4a carbie model?
|
|
|
Location:
Eastern Melbourne
Registered:
January 2005
|
|
Re: 3tc + ke70 = what
|
Fri, 08 April 2005 02:14
|
|
Im thinking about doing the same thing!
if you go to cardomain.com and search under corolla, you can find heaps of old school rollas with 3TCs in them running turbos, nitris, and best of all running quick quarters, like 11s, theres even a couple of sprinters running sub 10s with turbo 3tcs!! they are all in the U.S, so i dont know what the parts availability/supprot for these engines is here in oz
sorry to hijack this thread, but does anyone know the difference in difficulty, installing a 3T as compared to a 4AG?
do they both require custom crossmember/mounts?
|
|
|
On Probation
Location:
launceston tas
Registered:
March 2005
|
|
Re: 3tc + ke70 = what
|
Fri, 08 April 2005 04:05
|
|
|
yeah depends if it is a ke70 it will coz the t18 crossmember is the same so i dont reckon it would be to hard
|
|
|
Location:
Melbourne, Australia
Registered:
March 2005
|
|
Re: 3tc + ke70 = what
|
Fri, 08 April 2005 16:03
|
|
|
I've just done 2T-G into KE70 sedan, it's not hard. I used TE72 engine mounts and brackets with a TE72 crossmember. Steering rack mounts were donated by the KE70 rack and tack welded in. New gearbox crossmember for the T50, KE70 manual tailshaft fits. Hydraulic clutch is required, AE71 pedal box is useful for this. I've heard TE72 column is differently positioned and the pedal box assembly wraps around the steering shaft, so I'd avoid TE7# pedals as it could end in tears. Aside from that, it's all pretty straight forward.
|
|
|
Location:
Perth, WA
Registered:
December 2004
|
|
Re: 3tc + ke70 = what
|
Fri, 08 April 2005 16:13
|
|
as far as a 4a of any sort into a ke70, theres a model called the ae71, which is well suited to this task  the main thing you have to worry about installing a 4age is the EFI shit, like loom, ecu etc. and the fuel setup. also, if you go a silvertop 20valve, you need to reroute the water inlet/outlet as it faces the firewall in a RWD applcation.
id personally just find an ae71, drive thaht around, save up for a 4age, and loom, surge tank etc.
and pull it off the road for 2-3 months and do the job properly.
Eldar.O.
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 3tc + ke70 = what
|
Sat, 09 April 2005 00:52
|
|
| ke30king wrote on Fri, 08 April 2005 14:05 |
yeah depends if it is a ke70 it will coz the t18 crossmember is the same so i dont reckon it would be to hard
|
you should have a closer look... rack and pinion or steering box what? 
|
|
|
On Probation
Location:
launceston tas
Registered:
March 2005
|
|
Re: 3tc + ke70 = what
|
Tue, 12 April 2005 11:21
|
|
|
oh and another reason i dont wabt a 4a is coz i wanna keep it ol school
|
|
|
On Probation
Location:
North East NSW
Registered:
December 2002
|
|
Re: 3tc + ke70 = what
|
Wed, 13 April 2005 06:22
|
|
just buy the whole t-18. use the crossmember, including steering and struts, and put these in your ke70. use the 3t, gearbox and tailshaft, and put the larger T series diff in your ke70 as well. it SHOULD all just bolt in
then ypu can go to an importers and buy a T series LSD 
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 3tc + ke70 = what
|
Wed, 13 April 2005 06:36
|
|
|
surely you would want to keep the rack and pinion, instead of going to a shittier style of steering?
|
|
|
On Probation
Location:
launceston tas
Registered:
March 2005
|
|
Re: 3tc + ke70 = what
|
Wed, 13 April 2005 11:55
|
|
thats wat i was sortof gunna do any waze so yeah good idea
|
|
|
Location:
On your mum!
Registered:
May 2002
|
|
Re: 3tc + ke70 = what
|
Wed, 13 April 2005 12:38
|
|
Maybe buy the T18 and save yourself a whole heap of grief - save your talents for converting it to rack and pinion. You will have the best of all options then IMO.
P.S reading the apparently shortened version of the english laguage is draining and almost commands no response.
|
|
|
Location:
Tasmania, Evandale
Registered:
April 2005
|
|
Re: 3tc + ke70 = what
|
Thu, 14 April 2005 04:45
|
|
|
well lloyd if u do make steveatos a good offer to get that other T-18 and ill get some of those parts off u and i think maybe u should be able to put the rack and poinion strain onto the Te72 cross member i think!
|
|
|
Location:
Launceston
Registered:
March 2005
|
|
|
Location:
Tasmania, Evandale
Registered:
April 2005
|
|
Re: 3tc + ke70 = what
|
Tue, 26 April 2005 01:29
|
|
|
well im sorry steve orders autos then
|
|
|
Location:
deloraine tas
Registered:
September 2004
|
|
Re: 3tc + ke70 = what
|
Tue, 26 April 2005 11:06
|
|
|
yeah ive seen it up there near the tip. do you guys in tassie a a spare t-18 t50 gear box laying about do you??? need one for my brothers 3tgte
|
|
|
Location:
Tasmania, Evandale
Registered:
April 2005
|
|
Re: 3tc + ke70 = what
|
Wed, 27 April 2005 23:17
|
|
i got a T50 Gearbox out of my other T-18 but theres a Problem! Its a RA22 Celica T50 Gearbox, so the gearstick mounting is forward by about 200mm because there three different types of them each have different positions for the gearstick.
|
|
|
Location:
deloraine tas
Registered:
September 2004
|
|
Re: 3tc + ke70 = what
|
Thu, 28 April 2005 10:59
|
|
|
dont you mean out of a ta22? if it was out of an ra23 it would be a w50 box.
|
|
|
On Probation
Location:
launceston tas
Registered:
March 2005
|
|
Re: 3tc + ke70 = what
|
Thu, 28 April 2005 11:22
|
|
|
yeah thats wat he means its the same as in the foto you posted in the ke corolla thread
|
|
|
Location:
Adelaide, drift capital
Registered:
May 2004
|
|
Re: 3tc + ke70 = what
|
Thu, 28 April 2005 12:30
|
|
Siff a 4age 16v aint oldskewl?
Go a 3T-GTE 
|
|
|
Location:
Tasmania, Evandale
Registered:
April 2005
|
|
Re: 3tc + ke70 = what
|
Thu, 28 April 2005 23:35
|
|
|
yeh TA22 wotever i new wot i was talking about
|
|
|
