Author | Topic |
Location: Ballarat
Registered: September 2003
|
2tg/3t: Heaps of bits/performance parts
|
Fri, 04 March 2005 05:36
|
|
Im selling off all the components of the 2t/3t hybrid i was building, i never got to assemble it and i am now transporting another motor in its place. So ill reserve the right to keep any parts if i need them, but as it stands, the following parts are for sale:
*Yamaha stamped 2tg FULLY reconditioned head. Everything has been done, ie. it has new valve seats. It is a 11111-88260 so its the 'desirable' head.
*Its shims have been set and checked for high lift cams that have been built up and machined to aggressive specs, i think they are wade 584A grind ex 80.5 - 45 deg, advertised duration 305.5,duration at .050 - 259, lobe lift .427",Valve lift .415". Intake 48.5 - 77deg.
I will seperate the cams from the head if it is feasible.
*2 cam gears
*Pair of good condition solex 40's, they were tuned a few months ago for my old 2tg head and ran well, been off car ever since. SOLD
*Good condition 2tg rocker cover
*Hastings brand new piston rings, still in box, never been used obviously. They fit standard 3t pistons SOLD
*Ram-Flow air filters, absolutely, mint condition. They ran on my 2tg for no longer than a 1km test drive. So they are practically brand new, i still have the boxes for them. SOLD
*Clutch plate, that once again got used for no longer than 1km.
*I have a clutch, a bit of wear, the teeth are slightly bent, but certainly more than useable, it engaged fine for my short drive.
*I have 5 3t pistons with conrods. 3 have had the valve reliefs already machined in preperation for the 2tg head upgrade. I have another 3t piston that is 10" oversize.
*Good condition 3t crank. SOLD
*2tgeu electronic ignition SOLD
*2tg head gaskets, have 2 of them. I have an assortment of other gaskets, ask if you need any, ill let you know. SOLD
*I also have all other bits of a motor needed to assemble a 2t/3t. That is things such as water pumps, oil pickup, chain tensioners, etc etc ask if you need anything. i have a damaged 2t block that would suit an overbore. I have a set of brand new still in box bearings, im not sure if they are big end or main, but let me know if you need either, and ill get back to you.
Let me know what you are interested in, ask any questions you wish, and ill get some digital photos up asap when requested for certain parts. thanks, grant.
[Updated on: Mon, 21 March 2005 06:01]
|
|
|
Location: Adelaide
Registered: May 2002
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Fri, 04 March 2005 09:18
|
|
electronic ignition, complete, coils ignitors and dizzy,
how much ?
Brendon
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Sat, 05 March 2005 02:02
|
|
i think it is complete bro, i bought it ages ago and never used it. i will get photos of it and you can see for yourself ok?
|
|
|
Location: Castle Hill, Sydney
Registered: February 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Sat, 05 March 2005 07:40
|
|
what would you be after for the complete head
and what about just the cams. with shims
thanks, jesse
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Sun, 06 March 2005 02:53
|
|
im gonna have photos up late tuesday/early wednesday
send me a pm jesse
|
|
|
Location: Perth
Registered: July 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Sun, 06 March 2005 03:33
|
|
*cough*
mememememememe!!
|
|
|
Location: deloraine tas
Registered: September 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Sun, 06 March 2005 09:48
|
|
im keen on the head with cams pm me with price
|
|
|
Location: Launceston
Registered: February 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Sun, 06 March 2005 10:06
|
|
Price on the 2T-geu electronic dizzy please.
|
|
|
Location: Canberra/Sydney
Registered: February 2005
|
|
|
Location: Melbourne, Victoria
Registered: February 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Tue, 08 March 2005 00:36
|
|
What filters come on the set of carbies?
I am after some trumpets to suit a set of 40mm Solex carbs.
How much for the Ramflo filters?
nickel@alphalink.com.au
|
|
|
Location: deloraine tas
Registered: September 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Tue, 08 March 2005 08:42
|
|
whats up with me dizzy nik sorry did not no blame rod not me
|
|
|
Location: Perth, WA
Registered: December 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Tue, 08 March 2005 15:57
|
|
i need starter motor and the various belts... although, if you have it handy, know what belts i can buy new?
Cheers,
Eldar.O.
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Thu, 10 March 2005 05:56
|
|
Electronic Dizzy
Cam gears, clutch and 3t pistons
Sump, Ram-flo air filters, new rings
Lightened and faced flywheel, water pump, alternator, carbies
Assorted crap that makes up a 2TG and cam cover
Solex carbies
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Thu, 10 March 2005 05:57
|
|
pictures of reconditioned head:
k i finally got the pics up. nothing has been cleaned or degreased, apologies. i didnt have time, otherwise the pics woulda taken another day and itd start infuriating people. let me know what u think, send me a pm asap coz i dont intend on keeping it in the shed for too much longer. cheers, grant
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Thu, 10 March 2005 05:58
|
|
and in regard to the 2tgeu electronic dizzy, you can sort that out amongst yourselves coz ive had quite a few pms. ive had one offer of 100, so itll go to the highest offer within this post. word
|
|
|
Location: Adelaide
Registered: May 2002
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Thu, 10 March 2005 07:42
|
|
well considering I asked first bout the dizzy I thought I would have first dibs...
pm sent
|
|
|
Location: Ballarat
Registered: September 2003
|
|
|
Location: deloraine tas
Registered: September 2004
|
Re: 2tg/3t: performance parts(pics added)
|
Fri, 11 March 2005 07:44
|
|
pm price on the head
|
|
|
Location: Kilsyth, Melbourne
Registered: September 2004
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Mon, 14 March 2005 08:47
|
|
have a new radiator from natrad
|
|
|
Location: Adelaide
Registered: May 2002
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Mon, 14 March 2005 10:31
|
|
so can I have the elec ignition yet ?
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Tue, 15 March 2005 05:34
|
|
currently its going to sikta22 at an offer of 150. word
|
|
|
Location: South Aust.
Registered: November 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Wed, 16 March 2005 02:25
|
|
How much do you want for the Yammi head?
|
|
|
Location: South Aust.
Registered: November 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Wed, 16 March 2005 02:31
|
|
Also how much for the radiator?
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Mon, 21 March 2005 06:02
|
|
sent you a pm mate
|
|
|
Location: Devonport Tasmania
Registered: June 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Mon, 28 March 2005 09:47
|
|
what gaskets you got ?
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Tue, 29 March 2005 01:43
|
|
sorry mate, sold the gaskets
|
|
|
Location: Rockingham,WA
Registered: June 2004
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Sun, 03 April 2005 03:50
|
|
pm sent
|
|
|
Location: melbourne
Registered: March 2005
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Sat, 09 April 2005 10:49
|
|
hi mate is that block still for sale how much and is it sill standard bore 85mm? and whats the cast code on the side?11411-????? thanks
|
|
|
Location: Ballarat
Registered: September 2003
|
Re: 2tg/3t: Heaps of bits/performance parts
|
Thu, 14 April 2005 10:06
|
|
i gave the block away sorry mate
|
|
|