| Author | Topic |
|---|
Location:
Brisbane
Registered:
July 2004
|
|
Ra23 brake master cylinder
|
Wed, 13 April 2005 09:41
|
 |
does anyone know which spings goes in first? theres a long spring and a short spring and i stupidly didnt notice when i pulled it apart which order they go in.
Thanks
|
|
|
Location:
Brisbane
Registered:
July 2004
|
|
Re: Ra23 brake master cylinder
|
Wed, 13 April 2005 10:50
|
|
ANYONE? 
|
|
|
Location:
Adelaide
Registered:
June 2003
|
|
Re: Ra23 brake master cylinder
|
Thu, 14 April 2005 06:40
|
|
I just had a look in the Corona Chassis manual. The springs in there are the same, so that doesn't really help.
It appears that all the springs do is space the pistons into the correct places from the end, each other, and the beginning.
Do a test fit with the springs in different locations and the reservious out and see how the pistons line up. If you can get the pistons for each reserviour looking like their in teh same position relative to the hole that the reserviour goes into, then I geuss youd be right.
NOTE: I have never played with one of these things, just with the corona book. I don't pretend to know the answer, and therefore, please be careful when testing this.
I hope you can figure it out.
|
|
|
Location:
Brisbane
Registered:
July 2004
|
|
Re: Ra23 brake master cylinder
|
Thu, 14 April 2005 06:53
|
|
|
Thanks for that champ, really appreciate it.
|
|
|
Location:
Adelaide
Registered:
June 2003
|
|
Re: Ra23 brake master cylinder
|
Fri, 15 April 2005 03:57
|
|
|
Have you got it yet?
|
|
|
