Author | Topic |
Location: Glossodia,NSW
Registered: May 2002
|
|
|
Location: Glossodia,NSW
Registered: May 2002
|
|
|
Location: Melbourne
Registered: August 2002
|
Re: Car Audio - SYDNEY
|
Mon, 18 April 2005 10:34
|
|
what's the power handling of the 10" subs in wrms?
is the Avantgarde amp bridgeable?
|
|
|
Location: Glossodia,NSW
Registered: May 2002
|
Re: Car Audio - SYDNEY
|
Mon, 18 April 2005 11:28
|
|
The subs can handle 300wrms,the avantgarde is bridgeable with a 4ohm load,it cannot handle 2ohm when bridged.it can however run 2ohm in stereo mode,e.g keeping it at 2channel
|
|
|
Location: Melbourne
Registered: August 2002
|
Re: Car Audio - SYDNEY
|
Mon, 18 April 2005 12:32
|
|
how old is the amp? have u got wires as well?
is the 12" dual coil as well? what's the spec of it?
|
|
|
Location: Glossodia,NSW
Registered: May 2002
|
Re: Car Audio - SYDNEY
|
Tue, 19 April 2005 05:17
|
|
The 12" MTX is an old sub,it's single 4ohm voice coil and can handle 150wrms,the amp is old too,but the avantgardes are a tough performer.When i used to work at hypersound these things sold pretty well.Wires?? you mean rca and power,im not supplying those
|
|
|
Location: Melbourne
Registered: August 2002
|
Re: Car Audio - SYDNEY
|
Tue, 19 April 2005 23:13
|
|
pmed u.
do u have the model number of the amp and the 10" sub?
what's the dimension of the 10" sub box?
|
|
|
Location: Glossodia,NSW
Registered: May 2002
|
Re: Car Audio - SYDNEY
|
Wed, 20 April 2005 10:31
|
|
avantgarde is a 23dxi 2x200watts
The 10' subs are an american brand Direct Electronics Industry,same company that makes the famous viper alarms.It's an old "High Fidelity" series.The model number is on the back of the sub and i dont wanna pull it out of the box again.So i;ll show you some pics
Box dimensions are 300mm high x 280mm deep x 400mm long
[Updated on: Wed, 20 April 2005 10:35]
|
|
|