Author | Topic |
Location: bendigo, VIC
Registered: October 2004
|
RSM installation on st184
|
Sun, 01 May 2005 11:13
|
|
has anyone done this and can anyone tell me how i can install mine??
thanks
i know theres a wiring diagram and that but i dont know which cable is which....
|
|
|
Location: Brisbane, Queensland
Registered: January 2004
|
|
|
Location: bendigo, VIC
Registered: October 2004
|
Re: RSM installation on st184
|
Mon, 02 May 2005 03:40
|
|
only for 3sgte and 3sge... not 5sfe in a 184...
and i was also asking how i can get to the ecu as its like behind the console...
|
|
|
Location: Brisbane, Queensland
Registered: January 2004
|
|
|
Location: bendigo, VIC
Registered: October 2004
|
Re: RSM installation on st184
|
Mon, 02 May 2005 13:32
|
|
i gotta attach the rev as well, does anyone know if the 5sfe ecu actually gives live data so it will work? or only the 3sgte... although the mr2's are listed in there...
|
|
|
Location: Brisbane, Queensland
Registered: January 2004
|
Re: RSM installation on st184
|
Mon, 02 May 2005 21:08
|
|
agent_felix wrote on Mon, 02 May 2005 23:32 | i gotta attach the rev as well, does anyone know if the 5sfe ecu actually gives live data so it will work? or only the 3sgte... although the mr2's are listed in there...
|
the MR2 5SFE is the same as the ST184 5SFE wiring wise.
|
|
|
Location: bendigo, VIC
Registered: October 2004
|
Re: RSM installation on st184
|
Tue, 03 May 2005 09:23
|
|
ok, the diagram was for a 3sgte, now i have found an ecu map for a 5sfe and it has no tacho wire... as it needs the rev part;-...
|
|
|
I Supported Toymods
Location: Sydney
Registered: December 2002
|
Re: RSM installation on st184
|
Tue, 03 May 2005 11:40
|
|
Tacho = IGT.
Its there... seriously.
|
|
|
Location: bendigo, VIC
Registered: October 2004
|
Re: RSM installation on st184
|
Tue, 03 May 2005 13:20
|
|
i know im an uber noob at this type of thing... i have never played with this part before... only the audio type which, compared, is piss easy.
|
|
|
Location: Brisbane, Queensland
Registered: January 2004
|
Re: RSM installation on st184
|
Tue, 03 May 2005 21:31
|
|
Mate all you have to do is look at the diagram, i know its crap but you can still make out what pin and plug its on.
Plug B Pin 6.
|
|
|
Location: Brisbane
Registered: May 2005
|
Re: RSM installation on st184
|
Mon, 30 May 2005 10:56
|
|
Hey, im so glad i stumbled accross this. i just bought an rsm y'day and too needed the wiring diagram for a st184. just to confirm, speed was plug A pin 12 and revs was plug B pin 6?
Also. where is the ECU? under passenger dash/ behind glovebox?? and do i take off where the clear/yellowy plastic cover is?
hope u understand.. hope u can help.
Cheers,
|
|
|