| Author | Topic |
|---|
Registered:
February 2005
|
|
|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica
|
Sat, 14 May 2005 00:12
 
|
 |
Which generation 3sgte?
Gen 3????
Flange type?
Suit internally gated or externally?
Pics?
|
|
|
Location:
brisbane
Registered:
May 2003
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica
|
Sat, 14 May 2005 13:29
|
|
|
pics
|
|
|
I supported Toymods
Location:
Melbourne Australia
Registered:
November 2003
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica
|
Sun, 15 May 2005 11:52
|
|
pics of the manifold. tuned length to within 20mm, will suit a t28, internally gated and will suit gen3. charliemr2 may clarify some of these details next time he's online. manifold is also heat wrapped.
Inside where pipes merge
**********
External Pics
**********
|
|
|
Registered:
February 2005
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
Tue, 14 June 2005 04:48
|
|
|
price drop $250.00
|
|
|
I supported Toymods
Location:
Melbourne Australia
Registered:
November 2003
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
Tue, 14 June 2005 15:05
|
|
 Cheap! really good quality manifold, would be great for anyone wishing to upgrade from factory manifold.
Bump 
|
|
|
Registered:
February 2005
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
Sat, 02 July 2005 23:03
|
|
hey guys the manifold is still 4 sale ,surely there must be someone who needs one ,,, 
|
|
|
Location:
Sydney
Registered:
October 2003
|
|
|
Registered:
February 2005
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
Sun, 03 July 2005 05:43
|
|
Hi Dave, dont know if u would have any trouble with the alternator as mine is on the otherside under the intake manifold ,as in the sw20 mr2.
lt would certainly be further away from the firewall as apposed to the ct26 . Firstly why dont u move the alternator to the other side ,An alternator bracket shoudnt cost v,much it would also give u more room to work on the car l know that u would have to modify the wiring a little bit but ultimately it would be worth the effort .From what l could see ,u seem to have done a reasonable job on the manifold ,what exactly is the problem with it does it leak from poor welding or cracks ? lf l can help give me a call , 0411288027
Cheers Charlie
|
|
|
Location:
Sydney
Registered:
October 2003
|
|
Re: F/S Custom made turbo Manifold 3sgte Mr2 or Celica pics
|
Sun, 03 July 2005 17:07
|
|
Long story, don't know if it leaks or not. Going to find out that when she gets running. I MIG'd it first up and took some dodgy advice and brazed a couple of areas I couldn't get to with the MIG. Anyways, took it out to my old mans and had him teach me a lesson with the oxy and I've gone over 'most' of the welds. I found a lot of holes around the MIG which leads me to believe there's probably still more I didn't find. And also, the areas with the braze are a bit contaminated by it.
I actually modified the wiring (SW20 loom) to get the alternator on that side. With the standard bracket I was lead to believe I would have had to relieve the rear corner to fit the alternator. I wasn't really ready back then to start experimenting too much.
|
|
|
