I was putting my st162 back together after throwing in an aftermarket temp gauge and the glove box is now jammed. Turns out i didn't actually have to take it out to install the gauge , spewin. I can't open it or get it out even with no screws in place. I think maybe the cable has snapped.
Any advice on how i can fix it?
put the key in it and try turning it then. Mine (in an aw11) sometimes shuts and the barrel must turn a little bit when it is shut too quickly. The key slot should be vertical or horizontal.
ya left boot is another helper... fixed me old mans in his honda.... screws were jammed out stopping from opening and closing gave it a good old kcik put a small dent but was worth it to get it working again
ya left boot is another helper... fixed me old mans in his honda.... screws were jammed out stopping from opening and closing gave it a good old kcik put a small dent but was worth it to get it working again
might give that a go, it's been copping some shtick from my right fist, but it just isn't working. Suppose even if i do break it i could just get another one from a wreckers. I'll have another look soon.
Mon, 16 May 2005 07:27
, spewin. I can't open it or get it out even with no screws in place. I think maybe the cable has snapped. 
and yes he tried hittin it and swearin at it 