| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
 DIY adjusting wastegate rod mod for lower boost levels.
|
Tue, 24 May 2005 10:15
|
 |
has anyone tried this mod to make a wastegate open earlier for lower boost levels?
cheers.
|
|
|
Location:
Brisbane
Registered:
April 2004
|
|
Re: DIY adjusting wastegate rod mod for lower boost levels.
|
Tue, 24 May 2005 11:08
|
|
|
Lower boost who wants lower boost more boost more boost it will work for lower boost but for more boost the trick is no good because your putting more pressure on the spring but at the same time your shortening the amount of travel that the waste gate can open. I knew this fella who did this it worked for more boost but it spiked very bad. But less boost i can't see why not. But the limitations is still there soon as that waste gate opens from lengthening the rod boost it takes longer to come on if at all.
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: DIY adjusting wastegate rod mod for lower boost levels.
|
Tue, 24 May 2005 11:16
|
|
| ra_28 wrote on Tue, 24 May 2005 21:08 |
Lower boost who wants lower boost more boost more boost
|
haha.. yes the feral likes more boost  , but i doubt the 9.5:1 c/r lil feroza engine will. 
| Quote: |
But the limitations is still there soon as that waste gate opens from lengthening the rod boost it takes longer to come on if at all.
|
so are you saying it might make the turbo to appear laggy?
|
|
|
