Author | Topic |
Location: Melbourne, Australia
Registered: March 2005
|
Resizing conrods
|
Wed, 25 May 2005 17:18
|
|
Does the process of resizing conrods involve machining the big end bearing surfaces to spec, or something else?
|
|
|
Location: tallahassee FL usOFa
Registered: May 2002
|
|
|
Location: Melbourne, Australia
Registered: March 2005
|
Re: Resizing conrods
|
Thu, 26 May 2005 00:05
|
|
Okay, thanks.
|
|
|
Location: South Australia
Registered: July 2002
|
Re: Resizing conrods
|
Thu, 26 May 2005 01:49
|
|
allencr wrote on Thu, 26 May 2005 05:35 | yes. they'll cut/grind/machine some off the rod or cap or both, and hone it to size. its center to center will be a little shorter and its deck height will be a little more.
| Isn't that unpossible? If the centre-centre is shorter then deck height *must* also be shorter.
|
|
|
Location: South Australia
Registered: July 2002
|
Re: Resizing conrods
|
Thu, 26 May 2005 01:55
|
|
Oh unless deck height is measured the other way (ie the lower the piston the greater the deck height)
|
|
|
Location: Brisbane
Registered: October 2002
|
Re: Resizing conrods
|
Thu, 26 May 2005 06:17
|
|
thats only if they mill the rod, if they just do the cap then the center to center will be like 0.0015"
or 15 ten thousandths of 1 inch
fuck all
|
|
|
Banned by his request
Location: moved to tamworth
Registered: July 2002
|
Re: Resizing conrods
|
Fri, 27 May 2005 00:06
|
|
rod bolts aswell!
mick
|
|
|
Location: Melbourne, Australia
Registered: March 2005
|
Re: Resizing conrods
|
Fri, 27 May 2005 02:15
|
|
kingmick wrote on Fri, 27 May 2005 10:06 | rod bolts aswell!
mick
|
Please elaborate; your sentence fragment is not clear in meaning.
If you're saying replace the rod bolts as well, then yes, I intend to.
|
|
|
Location: Brisbane
Registered: October 2002
|
Re: Resizing conrods
|
Fri, 27 May 2005 07:09
|
|
i dare say thatws what he means
actually the deck height doesnt have naything to do with the pistons, all that refers to is the block only
|
|
|
Location: South Australia
Registered: July 2002
|
Re: Resizing conrods
|
Fri, 27 May 2005 14:28
|
|
So the deck height won't change then when the conrods are resized....but the piston may sit lower ... ?
|
|
|
Banned by his request
Location: moved to tamworth
Registered: July 2002
|
Re: Resizing conrods
|
Fri, 27 May 2005 21:25
|
|
risize rod bolt holes aswell and have a machinist fit the.better than just knocking them in and always replace them.
mick
|
|
|
Location: Brisbane
Registered: October 2002
|
Re: Resizing conrods
|
Fri, 27 May 2005 23:59
|
|
RWDboy wrote on Sat, 28 May 2005 00:28 | So the deck height won't change then when the conrods are resized....but the piston may sit lower ... ?
|
yep, but the pistons will only sit like one thou lower
|
|
|