Author | Topic |
Location: Melbourne
Registered: May 2005
|
18 RG Gasket
|
Fri, 27 May 2005 13:24
|
|
looking for a set of head gasket
and maybe for the manifolds as well
cheers
|
|
|
Location: Brisbane
Registered: April 2004
|
Re: 18 RG Gasket
|
Fri, 27 May 2005 21:49
|
|
Acl do a full kit cost about $220 I think. Off the shelf Item
|
|
|
Location: Melbourne
Registered: May 2005
|
Re: 18 RG Gasket
|
Sat, 28 May 2005 03:40
|
|
thanx mate
burson actually seling the set for $180
just for the head gasket its $120
but i can get one at autobarn for $80
does anyone have one around you might wanna give away for say $50
i heard a copper gasket one is better
but dont know the price or where to get one
|
|
|
Location: Brisbane
Registered: April 2004
|
|
|
Location: Rocklea qld
Registered: February 2003
|
Re: 18 RG Gasket
|
Sun, 29 May 2005 07:49
|
|
just to let ya know i paid $275 for a full gaskit kit. all new elsh plug and all bearings... and head gasket on its own was around $55. prices vary depending on the brand though.
|
|
|
Location: Tamworth
Registered: August 2004
|
Re: 18 RG Gasket
|
Sun, 29 May 2005 10:12
|
|
U dont want a copper gasket unless ur running high comp.
|
|
|
Location: Melbourne
Registered: May 2005
|
Re: 18 RG Gasket
|
Mon, 30 May 2005 09:05
|
|
yes indeed
my compression is a little bit higher than normal
|
|
|
Location: Brisbane
Registered: April 2004
|
Re: 18 RG Gasket
|
Mon, 30 May 2005 10:21
|
|
You still don't need a copper head gasket I was running 24psi making about 380hp into 18rg and was using a custom gasket not copper. I'm just build another motor 10.75:1 comp will use a custom gasket 1.8mm thick you can get them made through ACL they have the program to cut it out.
|
|
|
Location: Brisbane
Registered: October 2002
|
Re: 18 RG Gasket
|
Wed, 01 June 2005 11:23
|
|
i can get VRS kits for like $70
btw alex, ACL reckon they dont have that program on their comps, do u have a Part Number
|
|
|
Location: Brisbane
Registered: April 2004
|
Re: 18 RG Gasket
|
Wed, 01 June 2005 22:19
|
|
Um I'll look into the part number they should they told me that when I picked up my gasket.
|
|
|
Location: Townsville North Qld
Registered: June 2003
|
Re: 18 RG Gasket
|
Fri, 03 June 2005 01:57
|
|
I paid $180 from autobarn for a full kit made by garmax which is working fine in my 10.5:1 compression 18RG. DO NOT use a copper head gasket unless you oring both the block and head. a friend of mine just wasted his time and money in his V8 drag car by putting in copper head gaskets and blowing them straight away.
another person who can get 18RG stuff is stewart wilkins http://www.swmotorsport.com/ hes got some decent prices too
Cheers, Owen
|
|
|