| Author | Topic |
|---|
Location:
Melbourne
Registered:
April 2005
|
 MK3 readers looky here!
|
Fri, 10 June 2005 01:01
|
 |
doing ma70 to jza70 conversion, im snagged on the door plugs are diff, and the rear light plugs are diff, any ideas?... i've looked for pinouts no avail  help!!!
|
|
|
Location:
Adelaide, SA
Registered:
May 2002
|
|
Re: MK3 readers looky here!
|
Fri, 10 June 2005 01:14
|
|
Why are you mucking around with the door plugs and rear light plugs? They are part of the ma70 body loom - all you need to do (sounds easy but isn't) is mate the jza70 engine loom to the ma70 body loom - wiring in the inputs from dash to ECU and from ECU to TEMS etc.
Or are you putting the jza70 dash in as well?
|
|
|
Location:
Melbourne
Registered:
April 2005
|
|
Re: MK3 readers looky here!
|
Fri, 10 June 2005 01:19
|
|
|
the works, Dash and whole loom are in now, there are 2 door plugs on each side, and only 1 fits, the other one, the MA70 plug is a pyramid shape with 16pins, the JZA70 plugs are a square shape 15pin :S
|
|
|
I supported Toymods
Location:
Perth
Registered:
July 2004
|
|
|
Location:
VIC, Sth Frankston.
Registered:
July 2003
|
|
Re: MK3 readers looky here!
|
Fri, 10 June 2005 02:32
|
|
|
I've done this before, just match the wire colours up, only problem is I think there is atleast two wires with the same colour, use a multimeter to confirm what they connect to.
|
|
|
Location:
Melbourne
Registered:
April 2005
|
|
Re: MK3 readers looky here!
|
Fri, 10 June 2005 02:39
|
|
|
yeah i jsut don't want to short the entire loom out, and have a melt down.!!!!
|
|
|
I supported Toymods
Location:
Perth
Registered:
July 2004
|
|
Re: MK3 readers looky here!
|
Fri, 10 June 2005 02:44
|
|
|
unplug it first obviously before you start soldering..
|
|
|
Location:
Melbourne
Registered:
April 2005
|
|
Re: MK3 readers looky here!
|
Fri, 10 June 2005 02:45
|
|
|
nah no cutting, jsut gonna swap the pins over, to the jza70 plugs.
|
|
|
