Location: ipswich queensland
Registered: April 2004
3tg/2tg dizzy/ignition on boost??
Thu, 23 June 2005 21:47
ok i am building a hybrid 3tg/2tg turbo engine and am just wondering wat ppl have done about the distributor. i have heard that i will need to retard the timing but am unsure of a solution.
The 3T GTE uses a diaphragm that both advances with vacuum and retards with boost. Maybe you can adapt that vacuum canister into position on the 2T G distributor.
To completely solve the ignition problem, I changed my car to run coil per plug set up and igniton can be tailored however the engine best likes it.
Location: ipswich queensland
Registered: April 2004
Re: 3tg/2tg dizzy/ignition on boost??
Fri, 24 June 2005 22:25
hey, i am going to be running a haltech fuel only ecu. and yes i have considered the 3tgte diaphragm into the 2tge dizzy but no one has one and u cant buy them new for sum stupid reason. if sumone has access to one i would be hapy to buy it.
other then that all i can think of is goin to a ignition control or sumthin but im not sure wat one to use.
Thu, 23 June 2005 21:47
