Author | Topic |
Location: Perth, WA
Registered: October 2002
|
3K Tappet clearance
|
Sat, 11 January 2003 23:18
|
|
Hey guys...
how should i set the tappets on my 3K?? (ie. what clearance?)
at the moment its making a whole lot of noise!
thanks,
CamZH
|
|
|
I supported Toymods
Location: Toodyay, WA
Registered: July 2002
|
Re: 3K Tappet clearance
|
Sat, 11 January 2003 23:20
|
|
Dont you hate it when you dont notice your signed in as someone else
CamZH
|
|
|
On Probation
Location: North East NSW
Registered: December 2002
|
Re: 3K Tappet clearance
|
Sun, 12 January 2003 00:43
|
|
hot clearance (80c)
inlet 0.20mm
exhaust 0.30mm
cold clearance (20c)
inlet 0.13mm
exhaust 0.23mm
looking from the front, number the rockers 1 to 8
put cylinder 1 to tdc. adjust 1, 2, 3 and 5
rotate crank one turn. adjust 4, 6, 7 and 8
i reccomend buying gregories manual #122a, toyota corolla 1200. i've heard the applicable haynes manual is better
cheers
Jamie
|
|
|
Location: Canberra, ACT
Registered: September 2002
|
Re: 3K Tappet clearance
|
Mon, 13 January 2003 07:54
|
|
yeah i haven't seen teh ke20 gregories but the haynes i have do a pretty good job of covering 3k rebuild/general-fixit stuff.
j.
|
|
|
I supported Toymods
Location: Toodyay, WA
Registered: July 2002
|
Re: 3K Tappet clearance
|
Mon, 13 January 2003 10:42
|
|
Thanks for the replies guys!
I'm not to worried about keeping the 3K going i just want it going
Soon i hope to have a 4A-GE! No more tappets!
No more push rods!
Yay!
CamZH
|
|
|
On Probation
Location: North East NSW
Registered: December 2002
|
Re: 3K Tappet clearance
|
Mon, 13 January 2003 12:36
|
|
ditto about just want it running
except my 3k is turning into a balanced 60 thou cammer 4k no need for programmable fuel
|
|
|