| Author | Topic |
|---|
Location:
Australia
Registered:
May 2004
|
|
Mr2 3S-GTE Sump Gasket
|
Mon, 27 June 2005 09:37
|
 |
|
Am located in Perth, please contact me if you have one.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Mr2 3S-GTE Sump Gasket
|
Mon, 27 June 2005 09:46
|
|
|
These are a silicon seal - go and buy a tube of oil resistant silicon, form a large bead along the clean edge of the pan, bolt it up so the bead just start to deform everywhere fromt contact with the other side, and then leave to set. Once set, tighten the pan up a little more till you see the bead bulge from light pressure. Done!
|
|
|
Location:
Brisbane, Queensland
Registered:
January 2004
|
|
Re: Mr2 3S-GTE Sump Gasket
|
Mon, 27 June 2005 10:51
|
|
If you got supercheap you can apparently order a cork seal for a 5s-fe which will fit.
If not, what clint said above.
|
|
|
