Author | Topic |
Location: Whyalla
Registered: June 2004
|
Z32 front 4 pot calipers
|
Wed, 29 June 2005 09:10
|
|
Howdy, looking for a front pair of Z32 calipers for a brake upgrade on my MX73. Just need the calipers as I already have a pair of rotors coming. And probably wont need pads as I will probably get a new pair of EBC greenstuffs, just depends on the condition of the pads on the calipers if they are included
Thanks in advance
|
|
|
Location: Melbourne
Registered: May 2004
|
Re: Z32 front 4 pot calipers
|
Wed, 29 June 2005 09:31
|
|
Post up a wanted on Nissansilvia.com
or have a look in the parts fo4 sale section on there aslo.
Good luck,
Jezza
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: Z32 front 4 pot calipers
|
Wed, 29 June 2005 09:48
|
|
or go to your local jap wreckers. wherever you go, they all seem to cost about the same - $300 for the calipers. sometimes you get rotors and pads with that, but who relly cares about 2nd hand pads & rotors?
I also highly recommend getting a seals rebuild kit from CrUZida (on these forums) to make sure you don't start pissing brake fluid everywhere after they're installed. Also an excellent time to check the condition of your brake lines, and possibly replace them.
|
|
|
Location: Sydney
Registered: September 2004
|
|
|
Location: Whyalla
Registered: June 2004
|
Re: Z32 front 4 pot calipers
|
Wed, 29 June 2005 11:27
|
|
already posted up a wanted ad at NissanSilvia and Skylines Aus and had a few guys offer some, but as always Im being a tight arse and shopping around......
I didnt know Cruzida had the seal kits, will defanately have to chase him up for a set.
Yeh exactly, I already have a set of rotors on the way, I could make do with a 2nd hand pair of pads for the time being until I get a set of Greenstuffs.
Cheers thanks for the link, didnt see them on these because Ive only been searching for "Z32" "r32" or "300zx" lol
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: Z32 front 4 pot calipers
|
Wed, 29 June 2005 11:32
|
|
oh right
R32/Z32 will be a bit cheaper. got R33 (slightly larger dwisc diameter)
|
|
|
Location: Hawthorn, Vic
Registered: March 2005
|
|
|
I supported Toymods
Location: Epping, Sydney
Registered: May 2002
|
Re: Z32 front 4 pot calipers
|
Wed, 29 June 2005 12:49
|
|
r32/z32 are alloy. r33 is also alloy, but has longer mounting arms to suit a bigger disc (296mm from memory). the rest of the R33 caliper is identical to the R32/Z32
|
|
|
Location: Whyalla
Registered: June 2004
|
Re: Z32 front 4 pot calipers
|
Wed, 29 June 2005 12:57
|
|
R33 use 296x30mm rotors whereas z32/r32 use 280x30mm? I would have went with either r33 or r32 calipers but found a pair of z32 rotors for a great price so Im going with them Ive sen pairs of z32/r32 calipers go on ebay for about 200 + post but there not listed very often, or I havnt been looking hard enough maybe
|
|
|