Author | Topic |
Location: Adelaide
Registered: June 2003
|
7mgte gasket kit
|
Mon, 11 July 2005 11:18
|
|
as the title states I'm after a 7mgte gasket kit.
either full as in top to bottom or just to do the head.
I know i could just go to sprints or some where like that, but just seeing if someone on here has one or get one at a good price.
Cheers Scott
|
|
|
I supported Toymods
Location: Perth
Registered: July 2004
|
Re: 7mgte gasket kit
|
Mon, 11 July 2005 14:44
|
|
ACL do one its about $380 from your local Repco..
Part Number is GR300MT
|
|
|
I Supported Toymods
Location: Lwr Templestowe, Melbourne
Registered: August 2004
|
|
|
Location: Adelaide
Registered: September 2003
|
Re: 7mgte gasket kit
|
Tue, 12 July 2005 03:24
|
|
Hiya Scott,
I have a spare ACL HG if you want to grab one.
Price is always a bargain as usual !!
Cheers
Michael B
042 111 9249
|
|
|
Location: Melbourne
Registered: November 2004
|
Re: 7mgte gasket kit
|
Tue, 12 July 2005 07:32
|
|
i get the full acl kit for the GE for 240 i dont c the turbo one being any more expensive
|
|
|
Location: Adelaide
Registered: June 2003
|
Re: 7mgte gasket kit
|
Tue, 12 July 2005 08:22
|
|
Thanks for the heads ups on price.
bbaacchhyy cheers but i have a Cometic metal hg.
Cheers Scott
|
|
|
Location: Redbank Plains,near Ipswi...
Registered: May 2002
|
Re: 7mgte gasket kit
|
Tue, 12 July 2005 12:04
|
|
acl dont do the GTE set as far as I recall. the manifold gaskets are different spec.
|
|
|
Location: Lismore, NSW
Registered: February 2003
|
Re: 7mgte gasket kit
|
Tue, 12 July 2005 23:52
|
|
Scott, whats the cometic gasket like? Have heard about these gaskets but cant find any info regarding them.
|
|
|
Location: Redbank Plains,near Ipswi...
Registered: May 2002
|
Re: 7mgte gasket kit
|
Wed, 13 July 2005 02:47
|
|
I can supply a full engine gasket /seal kit thru work for $281.20 plus post. this is for the imported 7MGTE. I have used quite a few cometic gaskets. like all metal gasklets they need a special fininsh for max life/holding power. We machine both the head and block specially if these type of gaskets are being used. you can't successfully just drop it onto an as-is block/head.
|
|
|
I supported Toymods
Location: Perth
Registered: July 2004
|
|
|