Author | Topic |
Location: Wodonga
Registered: May 2005
|
1GGTE sump for sprinter
|
Thu, 14 July 2005 10:59
|
|
I have searched for a definite answer to this question to no avail. Short of making up a custom sump, which sump do I use for a 1GGTE conversion into a sprinter. The engine is out of a 1990 GA70, and I am assuming from all the information I have found, that it is a mid-rear one.
|
|
|
Location: Adelaide
Registered: September 2003
|
Re: 1GGTE sump for sprinter
|
Thu, 14 July 2005 23:39
|
|
reading all the posts on converting old school celica's to R&P steering using an AE86 or KE70 crossember would tell me the crossmember leans to the back.
thus you would need a front sump to clear the crossmember.
just a thought, flame me if i'm wrong
|
|
|
Location: Wodonga
Registered: May 2005
|
Re: 1GGTE sump for sprinter
|
Thu, 14 July 2005 23:43
|
|
Thanks, will have a look. The sway bar runs very close under the front of the engine, so I need to leave room for the bar there.
|
|
|
Location: Carlingford, Sydney
Registered: May 2002
|
Re: 1GGTE sump for sprinter
|
Fri, 15 July 2005 13:55
|
|
u will need a front sump, and custom swaybar or sump
|
|
|
Location: Wodonga
Registered: May 2005
|
Re: 1GGTE sump for sprinter
|
Sat, 16 July 2005 05:32
|
|
Was in the process of making a new sump anyway, thought someone may know of an easier way. Thanks for the info
|
|
|