Can someone tell me the colours of the 4 wires that connect up to the oxygen sensor from the harness for my DLi 4agze.
I already know B-W is from the ECU.
There is a grey one that is shielded, I can't remember the others. You can get the wiring diagram for the 4agze ECU from club 4ag.
I'll check my car if you still need to know.
pretty sure the sheilded wire is your ox wire.
black is your ground
two white ones are your heater ones
best thing to do is to map them out with your multimeter from your ECU to the wire under the car. Thats how I did my blacktop oxy as the motor didnt even come with a plug for it.
if your really stuck try emailing hsvmaloo_r8@hotmail.com (rhys) he has a 4agze in his ae92 seca and he knows quite allot about them.
Not sure if this will do the same with the gze but my age needed the ECU to be reset (disconnecting (-) from the battery for 20 seconds)
Wed, 20 July 2005 13:06
