Author | Topic |
Location: Melbourne
Registered: July 2005
|
1g-gte Turbos
|
Sun, 24 July 2005 00:19
|
|
Just a simple question to the guys with a 1g-gte.
Are the twin turbos on a 1g less likely to destroy themself like the 1J-gte running good exhaust and 12/14psi?
Rich R
|
|
|
Location: Cabramatta, NSW
Registered: May 2002
|
Re: 1g-gte Turbos
|
Sun, 24 July 2005 01:48
|
|
It'll be fine. Many people have run 14psi all day every day.
The 1G-GTE turbos have steel wheels whereas the 1JZ-GTE are ceramic-coated.
|
|
|
Location: Adelaide, SA
Registered: May 2002
|
Re: 1g-gte Turbos
|
Sun, 24 July 2005 02:32
|
|
As long as they aren't gen1's - usually 1st gen turbos are getting a bit old, and as I experienced, they like to blow oil/water seals with style!
I have some rebuilt gen2's now, they are doing well at 15psi
|
|
|
Location: Melbourne
Registered: July 2005
|
Re: 1g-gte Turbos
|
Sun, 24 July 2005 09:19
|
|
Thanks, any idea of how much the turbos are to buy if they go bang ???
Rich
|
|
|
Location: Cabramatta, NSW
Registered: May 2002
|
Re: 1g-gte Turbos
|
Sun, 24 July 2005 09:30
|
|
If my memory is correct (and it often isn't ) they're about $200-$250.
|
|
|
Location: Adelaide, SA
Registered: May 2002
|
Re: 1g-gte Turbos
|
Sun, 24 July 2005 10:26
|
|
And can be had for less if you are lucky
Like with any used part, you wont know for sure if they're good until you have them in and running.
|
|
|
Location: WA
Registered: May 2005
|
Re: 1g-gte Turbos
|
Sun, 24 July 2005 12:53
|
|
iv got a gen 3
run 16psi daily for 3000km, no worries
|
|
|
Location: Arthurs Creek, Victoria
Registered: May 2002
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 02:38
|
|
I'm running 25psi with no problems at the moment...
|
|
|
Location: newcastle nsw
Registered: May 2002
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 04:50
|
|
shit wats your secret?
|
|
|
Location: Brisbane
Registered: April 2003
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 04:52
|
|
Strad's secret is right here...
1g-gte; GT40 rollerbearing Turbo - 25PSI
or you could look in his sig
|
|
|
Location: Adelaide, SA
Registered: May 2002
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 05:56
|
|
At least we know the 1G can handle the pressure
|
|
|
Registered: March 2005
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 06:59
|
|
Hey KiRK have you done any serious internal modifications like forged pistions or porting the head etc. I am plannign on running some simmilar boost pressures but am not quite sure if it can take it. I am plannign on putting a coper head gasket, arp head studs, new intake, injectors etc. but havent planned to touch the block or anything.
|
|
|
Location: Brisbane
Registered: April 2003
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 07:03
|
|
My engines stock dude... except for slightly better turbos and ECU. Stradlater is running the high PSI... I'm only on 14psi at the moment.
Cheers,
Kirk
|
|
|
Registered: March 2005
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 07:04
|
|
whoops lol. Sorry about that . OK stradlater
same questions apply to you.
Cheers
|
|
|
Location: Arthurs Creek, Victoria
Registered: May 2002
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 07:27
|
|
Internal Modifications : .................... None.
Half way Modifications : .................... Removed TVIS
Exerternal Modifications : Custom/Aftermarket everything minus the plenum.
|
|
|
Location: Carlingford, Sydney
Registered: May 2002
|
Re: 1g-gte Turbos
|
Mon, 25 July 2005 12:48
|
|
i also drive round every day of the week running 23-24psi
all seems well so far
|
|
|