Author | Topic |
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Minispool for G series...where?????
|
Thu, 04 August 2005 07:11
|
|
I have done the ring around today looking for a minispool for the soarer and sadly I cant find shit...where do people get them from for thier drag cressy's and what not?
cheers
matt
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: Minispool for G series...where?????
|
Thu, 04 August 2005 10:45
|
|
yeah but two things, thats a full spool and not what I am after, and its for a hilux diff, dont thier axels have more splines?
I could be wrong about the axels bit
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: Minispool for G series...where?????
|
Thu, 04 August 2005 11:50
|
|
thought u were going to just weld the center?
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: Minispool for G series...where?????
|
Thu, 04 August 2005 11:57
|
|
Intensevil wrote on Thu, 04 August 2005 21:20 | thought u were going to just weld the center?
|
been there...
broke that...
time for something a little more "permanent"
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: Minispool for G series...where?????
|
Thu, 04 August 2005 22:56
|
|
Worth a phone call.
|
|
|
Location: Osama's hideout
Registered: February 2003
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 02:27
|
|
when you find out let me know too.
i have to do something withh mine.
|
|
|
Location: brisbane
Registered: December 2004
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 02:43
|
|
theres a group buy for these things in the for sale section in the driveline section
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 03:00
|
|
no thats a true trac centre...not a minispool
1JZ.747 I might be getting one custom made, are you keen?
what are you running at the moment?
|
|
|
Location: Campbelltown
Registered: November 2003
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 03:01
|
|
check ebay, there is a heap of guys on the R31 skyline club getting there minspools off there
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 03:07
|
|
yeah becuase an R31 runs a conventional borg warner rear end...
i could have bought one of them from ten different places already...G series rear is not as common as the bog warmer
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 03:20
|
|
Have you been ringing conventional performance diff shops or 4WD shops? There is pretty much any centre you want available for a G-series if you ring the right place.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 03:24
|
|
ive rung a few local places and no one knows shit....
i need to confirm which year of the hilux G series is the same as mine...
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 03:33
|
|
They are all G-series so they should all be the same if you're just looking for a centre. I was under the assumption that all G-series centres (not the entire diff obviously) were substitutable with any other G-series.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 03:43
|
|
I was under the impression that the axels splines were different...
i.e. more splines for some diffs
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 04:06
|
|
Very early G series centres have some differences, but any aftermarket stuff will be made to suit later-model Hilux's which will be compatible with Soarer/Supra diffs.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: Minispool for G series...where?????
|
Fri, 05 August 2005 04:07
|
|
ok awesome, so its the late model stuff....
anyone else keen on a minispool for thier G series centre?
might be able to secure a better price if i order a few of them
|
|
|