Author | Topic |
Location: Redbank Plains,near Ipswi...
Registered: May 2002
|
ARP rod bolts 22R & 3SG
|
Thu, 09 June 2005 05:30
|
|
1 only set of unused ARP rod bolts with nuts and special lube. $80 posted to anywhere in australia
|
|
|
Location: Sydney
Registered: June 2005
|
Re: ARP rod bolts 22R & 3SG
|
Thu, 09 June 2005 12:09
|
|
if they suit a 3SGTE, let me know via pm., i jus might take them...
|
|
|
Location: Brisbane
Registered: October 2002
|
Re: ARP rod bolts 22R & 3SG
|
Fri, 10 June 2005 13:43
|
|
hey terry, they also suit 18R and 18RG
|
|
|
Location: Melbourne's East
Registered: March 2005
|
Re: ARP rod bolts 22R & 3SG
|
Sat, 06 August 2005 12:31
|
|
These still available?
Glen
|
|
|
Location: S.E suberbs, Vic
Registered: December 2003
|
Re: ARP rod bolts 22R & 3SG
|
Thu, 11 August 2005 10:08
|
|
I have been told that the big end needs to be re-rounded after changing to these, is that right?
|
|
|
Location: Brisbane
Registered: October 2002
|
Re: ARP rod bolts 22R & 3SG
|
Thu, 11 August 2005 14:35
|
|
indeed, any half decent shop can do them, hopefully they shouldnt charge more than $80 to fit the ARP's {if u supply them} and resize them {or re-rounded as u call it }
|
|
|
Location: Melbourne's East
Registered: March 2005
|
Re: ARP rod bolts 22R & 3SG
|
Mon, 15 August 2005 07:03
|
|
What is involved in 'rerounding'? Is this a modification to the bolts, rods or block to make them fit (clearances)?
Cheers
Glen
|
|
|
Location: Tamworth
Registered: August 2004
|
Re: ARP rod bolts 22R & 3SG
|
Mon, 15 August 2005 09:24
|
|
TurboRA40 wrote on Mon, 15 August 2005 17:03 | What is involved in 'rerounding'? Is this a modification to the bolts, rods or block to make them fit (clearances)?
|
Also called closing and honing. It involves grinding down the cap surfaces of the rod and honing the big end tunnel in the rod larger.
You need a special grinder and rod hone machine to do this.
|
|
|