Author | Topic |
Location: Brisbane
Registered: May 2005
|
3sgte into a sprinter ae86
|
Sat, 06 August 2005 14:50
|
|
what do you have to do to put a 3sgte to ae86 what gear box? how hard to do it? anyone done it b4? and engine mount problem?
|
|
|
Location: Melbourne, Australia
Registered: March 2005
|
Re: 3sgte into a sprinter ae86
|
Sat, 06 August 2005 15:11
|
|
This is a very big question. Search for TurboRA28's pictorial guide for engine mount ideas, especially Cool1's contributions. Consider other RWD S engine vehichles and the suitability of their transmission/clutch etc. for your application. SA63 used 2S in RWD config. 1S-C was RWD config with T50, which would not be suitable for 3S-GTE application. Inlet manifold clearance would be marginal to bonnet and brake booster I'd imagine. Sump might need attention, again consider 1S and 2S parts.
Disclaimer: I've never even thought about doing this and I've rattled this out in about 2 min, if you're going to do this you need to think about it more I think.
|
|
|
Location: Newcastle
Registered: August 2003
|
Re: 3sgte into a sprinter ae86
|
Sun, 07 August 2005 00:56
|
|
There are a couple on this forum which have done it...
And it is alot of work... if u r not fussy about keeping a toyota engine in a toyota like I am, another 2ltr turbo solution is the sr20det which is alot easier apparently, and easier again for the ca18det..... from what I heard.
do a search for "3sgte ae86"... should bring up alot..
|
|
|
Location: netherlands
Registered: August 2005
|
|
|