| Author | Topic |
|---|
Location:
karachi
Registered:
August 2005
|
|
Turbocharging 4AGE .
|
Wed, 17 August 2005 10:03
|
 |
HI ALL .
I want to turbo charge 4AGe i have done all most every thing except the fueling system .
I have option for 2 things
1. FMU 12:1
2. AIC HKS
i aim to run 6 psi rite now . 
|
|
|
Location:
Newcastle
Registered:
August 2005
|
|
Re: Turbocharging 4AGE .
|
Wed, 17 August 2005 11:03
|
|
|
hmm a factory engine may hold 5 psi standard but i wouldnt punch it too hard until u work the head and lower compression. otherwise bye bye pistons... lol what mods u done to it so far?
|
|
|
Location:
karachi
Registered:
August 2005
|
|
Re: Turbocharging 4AGE .
|
Wed, 17 August 2005 12:49
|
|
i few people told me tht 4age can take up to 10 to 12 psi ..
no mods just simple turbo installation
will a blox 12:1 FMu will be fine for 6 psi of boost .
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: Turbocharging 4AGE .
|
Wed, 17 August 2005 14:02
|
|
| salman wrote on Wed, 17 August 2005 22:49 |
i few people told me tht 4age can take up to 10 to 12 psi ..
no mods just simple turbo installation
will a blox 12:1 FMu will be fine for 6 psi of boost .
|
indeed with the right tuning and good intercooler.
|
|
|
Location:
karachi
Registered:
August 2005
|
|
Re: Turbocharging 4AGE .
|
Fri, 19 August 2005 16:07
|
|
pleas explain me what is good tuning in your eye ,. 
and who to cheat the map,
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: Turbocharging 4AGE .
|
Fri, 19 August 2005 22:39
|
|
running aftermarket engine management (microtech etc)and having someone that 'knows' what they are doing tune it.
i run a gze ECU set-up on my 4age-gte, but i lowered the c/r a bit because the ECU is not tuneable.
|
|
|
Location:
karachi
Registered:
August 2005
|
|
Re: Turbocharging 4AGE .
|
Sat, 20 August 2005 07:40
|
|
which GZE ECU do u have .. ??
for fueling till 5 psi . isnt a BLOX FMU 12:1 will work go0d .
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: Turbocharging 4AGE .
|
Sat, 20 August 2005 11:13
|
|
i'm running the aw11 bigport 4agze ECU, 365cc injectors, AFM, fuel pressure reg, dist, wiring harness etc on my bigport 4age (9.4:1 casties but useing a 2 HG's, approx 2.6mm) @ 12psi. i still useing the old original 4age fuel pump at the moment too.
i know nothing of add on ECU doobies (BLOX FMU 12:1??) as i havnt had the $$$ or the need yet to look into them.
|
|
|
Location:
karachi
Registered:
August 2005
|
|
Re: Turbocharging 4AGE .
|
Mon, 22 August 2005 05:56
|
|
|
what is the power out put ..
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: Turbocharging 4AGE .
|
Mon, 22 August 2005 12:51
|
|
only ever been on a dyno couple years ago when it was only at 7psi (engine was not long run in and i didnt have my dual stage contoller on at the time). got an ok 142rwhp.
havnt had it checked since i've been running 12psi, and it's been flogged HEAPS at 12psi.
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Turbocharging 4AGE .
|
Mon, 22 August 2005 13:27
|
|
hahha ahhahahah 
completely wanky FPR.. they don't say 12:1 what tho  shep? cheeses??
http://www.prostreetonline.com/buy/blox_fmus/
| Quote: |
BLOX FMUs
The Blox fuel management unit is designed to increase the fuel pressure as the pressure in the intake manifold increases. The Blox FMU is a universally design product with a 12:1 fixed ratio. The FMU is used on fuel injected vehicles, either supercharged or turbocharged, using the factory electronic engine management system. Blox FMU’s are available in blue, red, gold and gun metal.
|
|
|
|
Location:
karachi
Registered:
August 2005
|
|
Re: Turbocharging 4AGE .
|
Mon, 22 August 2005 13:34
|
|
dose'nt it work that way . honda at 8psi produce . 180+RWHP... 
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Turbocharging 4AGE .
|
Mon, 22 August 2005 13:37
|
|
| salman wrote on Mon, 22 August 2005 23:34 |
dose'nt it work that way . honda at 8psi produce . 180+RWHP...
|
what are you talking about?? you sound like you have much better drugs than me
the above is a fuel pressure regulator.. manifold reference pressure at top, fuel ports at bottom... it's even priced like a FPR??
|
|
|
Location:
tasmania
Registered:
August 2005
|
|
Re: Turbocharging 4AGE .
|
Mon, 22 August 2005 14:22
|
|
|
Mate you would be surprised how much of caining a car can take pistons are strong, the only thing that kills engines is detonation and leaning out, if the stock injectores, fuel pump and fuel regulator are good enough to deliver enough fuel its fine. For god sake I know some one that has turboed a 120y and a dirty old corolla that had like a 1.3 or some thing and made it fuel injected with mircotec and tuned it so it didn’t detonate and he super charged it and it went hard as. Good luck but I don’t know much about the 4ages as im asking as well im a Nissan man lol.
|
|
|
Location:
u.s.a. south
Registered:
April 2004
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: Turbocharging 4AGE .
|
Mon, 22 August 2005 20:45
|
|
oh oldcorollas that blox doobie is so prity, i must have one..
i use the gze fuel reg, works fine.
|
|
|
Registered:
July 2005
|
|
|
Location:
karachi
Registered:
August 2005
|
|
Re: Turbocharging 4AGE .
|
Tue, 23 August 2005 06:02
|
|
i really missunderstood that what are you trying to say ..i thought your Are saying that BLox is carp ... . but remaove that concept .
i will visits the site which are recommaned by the guest and other ...
|
|
|
