| Author | Topic |
|---|
Location:
qld
Registered:
May 2003
|
 I need a TPS for a 3TGTE, what'll Fit??
|
Mon, 05 September 2005 01:48
|
 |
Hey guys my 3tgte does not have a throttle position sensor and i really need to get my hands on one, does anyone know one which will go close to fitting it or an ideas for it.
Jason
|
|
|
Location:
qld
Registered:
May 2003
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Mon, 05 September 2005 06:03
|
|
|
shaft size is 8mm,
|
|
|
Location:
Adelaide
Registered:
June 2003
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Mon, 05 September 2005 06:53
|
|
Tough question, that one.
I've never seen one but I reckon they'd be of the same design as the 18RG ones.
Is it a squarish 3 pin box or a round 4 pin box?
The hardest thing will be to match up the internals, if it is a three pin square box then you'll find something that fits no worries.
The internals have numers written on them, as does the outside casing I think. The outside casing is a rough number, the internals have the actual number written on them.
This number is the throttle degree reading that the TPS gives out.
These differ from one engine to another.
Here the two that I've looked at:
5ME: 60 degrees (on casing), 58.5 (on internals)
18RGEU: 20 degrees (on casing), 18.5 (on internals)
They all have 8mm shafts.
These degree numbers are the movement intervals at which the TPS signal changes for accelleration.
I don't know if that will help you, but it might.
Get someone with a 3TGTE to check what degree number is written on theirs and see if you can find one with the same number on some other throttle body.
|
|
|
Location:
ipswich queensland
Registered:
April 2004
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Mon, 05 September 2005 07:59
|
|
im not sure about the 3tgte but on my 2tgeu in using one off a falcon. the only prob i have is that on no accel my tps is at 20%, i have a haltech so it doesnt matter but yer just so u know
good luck
laterdays
|
|
|
Location:
townsville NQLD
Registered:
February 2004
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Mon, 05 September 2005 10:16
|
|
|
i got a 5ME TB if you want it
|
|
|
Location:
qld
Registered:
May 2003
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Mon, 05 September 2005 11:49
|
|
| brett_celicacoupe wrote on Mon, 05 September 2005 20:16 |
i got a 5ME TB if you want it
|
and what is that???
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Mon, 05 September 2005 23:16
|
|
|
Are u after a switch style, or variable style for aftermarket ecu? 5ME for example is switch style. No good for aftermarket ecu.
|
|
|
Location:
sydney
Registered:
July 2004
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Tue, 06 September 2005 06:29
|
|
|
new from toyota there about $280 takes 4- 6 weeks for delivery
|
|
|
Location:
qld
Registered:
May 2003
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Wed, 07 September 2005 07:05
|
|
|
nissan fj20 tps fit perfectly but it is a swithc kind
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Wed, 07 September 2005 09:21
|
|
|
you can buy new ones from ppl like wolf/haltech, but they are cheaper from Farnell (rotary position switches i mean..)
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: I need a TPS for a 3TGTE, what'll Fit??
|
Wed, 07 September 2005 10:58
|
|
|
I concur with oldcorollas
|
|
|
