| Author | Topic |
|---|
Location:
Adelaide
Registered:
October 2002
|
|
KE10 tierod
|
Mon, 19 September 2005 04:09
|
 |
Peoples,
Need the threaded tube which connects the inner and outer tierods on a KE10. The tube that adjusts the wheel alignment. I need two in total (both sides) any help would be good, not even Toyota sells them anymore.
Cheers
|
|
|
Registered:
May 2002
|
|
Re: KE10 tierod
|
Mon, 19 September 2005 05:43
|
|
I haven't got one but it might be worth seeing if they are the same part on the later (KE20/KE25/KE30 etc) model corollas as they will be a bit more common and easier to find.
Just an idea.
Good luck.
|
|
|
Location:
Adelaide
Registered:
October 2002
|
|
Re: KE10 tierod
|
Mon, 19 September 2005 23:21
|
|
KE10 are different to KE20 etc.. Allready tried this option!
There must be plenty of people with spare KE10 parts lying around!??
|
|
|
Location:
Victoria
Registered:
May 2002
|
|
Re: KE10 tierod
|
Tue, 20 September 2005 02:56
|
|
I just did this as one of mine bent in my KE15 when i was traveling at 110kmh! (interesting experience)
There is a guy in clayton victoria, mechanic with tonnes of old corolla parts, i cant give u a name or address or phone number (what a help i am) but he helped me out with mine when i needed them, someone on these forums SHOULD know his name and number (ive got his card here but its faded!)
He said that they came with 2 different sized threads on the rods etc, but if u can get a hold of him he should be able to help you with replacements
|
|
|
Registered:
May 2002
|
|
Re: KE10 tierod
|
Tue, 20 September 2005 03:35
|
|
|
Hhhmmm so my first option was no good, what about getting some made at your local engineering shop? Obviously some second hadies would be cheaper but if all else fails I wouldn't think a threaded tube would cost too much to have made up.
|
|
|
