Author | Topic |
I Supported Toymods
Location: Wollongong, NSW
Registered: December 2003
|
7A-FE woes
|
Tue, 20 September 2005 11:58
|
|
I'm facing a rather complicated problem which confuses every mechanic I've come across....
I had the head of my 7A-FE (AE102 Seca) reconditioned a few weeks ago to try and fix an oil-burning problem (I diagnosed it as valve stem seals). After getting the car back, now it burns litres of oil per week. It went through 3 litres in 5 days at one point. Blue smoke everywhere, I'm surprised I haven't been done for air pollution yet. A few more conversations with mechanics, and it's looking like it might be piston rings.
So as I'm saving for a bottom-end reco, I noticed a puff of smoke on startup, and the blue smoke is mostly in the first few minutes of driving. I thought maybe there is a crack in the head, or the head reco was stuffed up. Any thoughts?
In an unrelated problem, the car misfires at times and the timing goes crazy (hunting between 5 and 10 degrees). I pulled error code 52 from the ECU. Is this for the knock sensor? Would a cactus knock sensor create this sort of havoc with the timing and ignition?
|
|
|
I Supported Toymods
Location: Wollongong, NSW
Registered: December 2003
|
Re: 7A-FE woes
|
Fri, 23 September 2005 15:43
|
|
Bump.... no ideas from anyone? Getting the head rechecked on Monday morning. Hopefully they find something, I'm too poor to do this more than once.
|
|
|